Airtac TN Double Axis Double Rod Cylinder TN16X125-S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN16X125-S is a genuine TN twin-rod (double-rod) double-acting cylinder, 16 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 201.1 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore16 mm
- Push thrust @0.5 MPa201.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN16X125-S
A twin-rod double-acting cylinder uses two parallel rods on one shared piston plate so the load moves without rotating. The AirTAC TN16X125S pairs a 16 mm bore with a 125 mm stroke, giving a 0.5 MPa push thrust of 201.1 N on the push side. An external bumper cushions impact and trims stroke over a -5 to 0 mm range.
This is a genuine AirTAC part built to the enterprise standard with PT thread only. Every unit ships magnet-fitted with switch slots around the body. We confirm dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN16X125-S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN16X125-S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 201.1 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose this 16 mm bore when 201.1 N push at 0.5 MPa suits the job; push thrust always exceeds pull. TN follows the enterprise standard with PT thread only - for JIS mounting, precise guide accuracy, two-side ports, or G/NPT threads, look at the TR series instead. Stroke 125 mm is within the bore 16 table; keep strokes moderate to avoid excess rod-end deflection on the short-cover body. We can confirm allowable side load from the datasheet for your application.
Applications
Push-off station
Rejects or pushes product off a conveyor belt at a fixed 125 mm travel, using the twin rods to keep the pusher face parallel and prevent product skewing.
Clamp actuator
Holds a workpiece flat against a fixture during machining, where the twin rods resist the bending moment from the cutting force and keep the clamp face square.
Lift-and-transfer gate
Raises a small lift plate 125 mm to present a part to a downstream station; the parallel rods stop the plate from tilting as it carries an off-center load.
FAQ
What thrust does the 16 mm bore produce at 0.5 MPa?
At 0.5 MPa the TN16X125S delivers about 201.1 N on the push side; pull thrust is lower because the rods subtract piston area. Confirm the pull value from the datasheet if your application needs it.
Can I use this cylinder for a side-loaded lift?
Twin rods resist bending and twisting far better than a single-rod unit, but every bore has published side-load curves. We confirm allowable side load and rod-end deflection from the datasheet so you can size correctly.