Airtac TN Double Axis Double Rod Cylinder TN16X30S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN16X30S is a genuine TN twin-rod (double-rod) double-acting cylinder, 16 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 201.1 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore16 mm
- Push thrust @0.5 MPa201.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN16X30S
A twin-rod cylinder uses two parallel rods on a shared plate to resist bending and twisting, letting the load mount without rotating. This AirTAC TN16X30S has a 16mm bore and 30mm stroke, providing controlled linear motion with an adjustable bumper that cushions impact and allows -5 to 0 mm stroke adjustment.
This is a genuine AirTAC part meeting enterprise standard specifications. It includes a standard magnet for position sensing and PT thread ports. We confirm exact dimensions and thrust figures from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN16X30S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN16X30S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 201.1 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Select the right bore for your thrust needs; this 16mm bore handles moderate loads. TN is the enterprise standard twin-rod cylinder with PT thread only, while TR adds JIS standard with higher non-rotating precision and G or NPT thread options. Keep the stroke within the bore's table to avoid over-loading the short cover, and contact us to confirm side-load suitability.
Applications
Pusher Station
Pushes parts evenly down a conveyor line using the twin-rod anti-rotation design to keep the load flat and stable.
Clamping Fixture
Clamps workpieces in a machining fixture where twist resistance prevents deflection under off-center loads.
Transfer Arm
Transfers small components between stations with a stable, non-rotating stroke for precise placement.
FAQ
What does the TN16X30S code mean?
TN is the enterprise standard twin-rod series, 16 is the bore in mm, 30 is the stroke in mm, and S indicates the standard magnet is included. Thread is PT only for the TN series.
How does the cushioning work?
It uses an external bumper that cushions impact and adjusts the stroke over -5 to 0 mm, not an air cushion. Side-load capacity and exact dimensions are confirmed from the datasheet.