Airtac TN Double Axis Double Rod Cylinder TN16X35S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN16X35S is a genuine TN twin-rod (double-rod) double-acting cylinder, 16 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 201.1 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore16 mm
- Push thrust @0.5 MPa201.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN16X35S
The AirTAC TN16X35S is a double-acting twin-rod cylinder with a 16 mm bore and 35 mm stroke. Two parallel rods share one plate, resisting bending and twisting so the load moves without rotation. At 0.5 MPa the theoretical push thrust is 201.1 N. An external bumper cushions impact and trims the effective stroke by up to 5 mm.
This is a genuine AirTAC part built to the enterprise TN standard with PT port threads. Every TN cylinder ships with a standard magnet for switch sensing; there is no non-magnetic variant. We confirm dimensions, port layout and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN16X35S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN16X35S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 201.1 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 16 suits light push and clamp loads; its theoretical push thrust is 201.1 N at 0.5 MPa. Choose stroke 35 mm within the bore's stroke table. Thread is PT only on the TN enterprise series. For higher non-rotating accuracy and two-side porting, consider the TR JIS equivalent instead. Avoid strokes far beyond the short-cover recommendation; confirm allowable side-load with us.
Applications
Workpiece Clamp
Clamps a flat workpiece against a fixed stop during machining, using twin-rod anti-rotation to keep clamping force square and repeatable cycle after cycle.
Transfer Pusher
Pushes parts off a conveyor belt into a bin; the non-rotating twin rods keep the pusher face parallel for consistent contact every time.
Carton Stopper
Stops a carton on a gravity roller line for labeling, then retracts; twin rods hold the stopper blade flat without twist under load.
FAQ
What thrust does the 16 mm bore TN16X35S produce?
At 0.5 MPa the theoretical push thrust is 201.1 N; the pull figure is lower because the rod area subtracts from the piston area. Operating pressure for bore 16 is 0.15-1.0 MPa (22-145 psi).
Does the bumper replace an air cushion?
Yes - TN cylinders use an external bumper that both cushions impact and adjusts effective stroke over -5 to 0 mm. There is no internal air cushion. We confirm side-load limits and dimensions from the datasheet on request.