verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote

This model is discontinued

AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE50X100SB, the same code under the new prefix. The ACE is a current-production ISO 21287 compact cylinder in the same bore and stroke range; the ACP followed the older DIN short-body format, so check the ACE drawing for mounting dimensions before ordering.

AirTAC ACP Series · Discontinued Compact Cylinder

Airtac ACP Compact Cylinder ACP50X100SB

The AirTAC ACP Compact Cylinder ACP50X100SB is a double acting DIN-standard tight/compact air cylinder with a Ø50mm bore and 100mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE50X100SB (ISO 21287 ACE), in the same bore, stroke and force class.

  • BoreØ50 mm
  • Stroke100 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.5
  • StatusDiscontinued → ACE50X100SB
$81.00 $88.50Save 8% Ships as ACE50X100SB (current AirTAC replacement)
Ships as ACE50X100SB, the current AirTAC replacement (the same code under the new prefix). Order this code as usual. Your cart, checkout and order confirmation will show the ACE50X100SB we ship. View ACE50X100SB
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACP50 stroke, mounting and version on one page All ACP50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACP Compact Cylinder ACP50X100SB

AirTAC has discontinued the ACP series. Order code ACP50X100SB is supplied as ACE50X100SB, the current ACE compact cylinder with the same code after the prefix. The ACE is built to ISO 21287 while the ACP followed the older DIN short-body format, so check the ACE drawing for mounting dimensions before you fit it.

The ACE50X100SB you receive is a double-acting compact cylinder with a 50 mm bore and a 100 mm stroke, a 16 mm piston rod with a male rod thread (the B code) and 1/8" ports. At 0.5 MPa it pushes about 981.7 N and pulls about 881.2 N; at 0.7 MPa about 1374.4 N and 1233.7 N. The S in the code adds a piston magnet for AirTAC magnetic position sensors.

Airtac ACP Compact Cylinder ACP50X100SB Technical Specifications

ModelAirtac ACP Compact Cylinder ACP50X100SB
SeriesACP DIN compact cylinder (discontinued)
ReplacementACE50X100SB
Bore sizeØ50 mm
Stroke100 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed bumper (both ends)
Max standard strokeUp to 250 mm

Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE50X100SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N881 N
0.7 MPa1374 N1234 N
Max (@1.0 MPa)200 kgf

The ACE50X100SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.

Model Code: Airtac ACP Compact Cylinder ACP50X100SB

ACPDIN compact cylinder (double-acting, discontinued).
50Bore size in mm.
×100Stroke length in mm.
SOptional built-in magnet for sensor position sensing (omit for no magnet).
BRod type: B = male thread; blank = female thread.

Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).

Where the Airtac ACP Compact Cylinder ACP50X100SB Is Used

precision_manufacturing

Compact clamping

About 982 N at 0.5 MPa in a short body, for fixtures and clamps where a profile cylinder is too long.

conveyor_belt

Stops and pushers

100 mm moves for part stops, pushers and gates on assembly and packaging lines.

sensors

Position-checked moves

With the magnet, a position sensor confirms the stroke end before the next step.

Replacing the Airtac ACP Compact Cylinder ACP50X100SB with the ACE50X100SB

Order by the ACP code or by ACE50X100SB; both describe the same cylinder. When you replace an ACP, match bore (50 mm), stroke (100 mm), rod end (male) and magnet (yes), then check the ACE drawing for the mounting holes and overall length.

For less force the 40 mm bore is the next size down; the 63 mm bore gives about 60% more push.

AirtacDistr lists every ACP50 order code with its price on one page at https://airtacdistr.com/products/airtac-acp50-compact-air-cylinder

Replacement checklist

  • ✓ Current-production ACE → ACE50X100SB
  • ✓ Same bore / stroke / force class
  • ✓ Confirm ISO 21287 mounting dimensions
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S for magnet if you need sensors
View ACE50X100SB

Airtac ACP Compact Cylinder ACP50X100SB FAQ

AirTAC has discontinued the ACP series. Order code ACP50X100SB is supplied as ACE50X100SB, the current ACE compact cylinder with the same code after the prefix. The ACE is built to ISO 21287 while the ACP followed the older DIN short-body format, so check the ACE drawing for mounting dimensions before you fit it.

At 0.5 MPa about 981.7 N push and 881.2 N pull; at 0.7 MPa about 1374.4 N and 1233.7 N. Usable force is lower because of friction, so size with a margin.

Related AirTAC ACE Cylinders

Request a Quote for the ACE50X100SB

Send us the quantity and destination. We confirm price, availability and lead time on the ACE50X100SB replacement — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.