
The AirTAC GAC F.R.L. Unit GAC300C10ALT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC300C10ALT assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port routes air through a 40 um element, after which the regulator sets a low outlet pressure of 0.15-0.4 MPa (20-58 psi). A circular gauge reading MPa/psi is fitted to verify the setpoint.
Air passes the filter first, then the regulator, and finally the lubricator so oil mist is added downstream of the regulator seat to prevent fouling. The metal bowl equips this unit for rugged environments, while the automatic drain clears the 60 cc condensate sump without an operator. Weighing 1300 g, the assembly uses quick mounting clamps that eliminate inter-unit tubing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300C10ALT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds 3/8in air lines to low-friction cylinders on a packaging machine where operating pressure must stay below 0.4 MPa to prevent product crushing.
Conditions supply for delicate pneumatic screwdrivers on an electronics assembly bench, adding oil mist to protect internal vanes while staying within the 20-58 psi range.
Prepares air for loom actuator networks where the metal bowl withstands ambient shop heat and the automatic drain handles continuous condensate load.
Choose this lower-pressure type for machines operating strictly under 0.4 MPa; if the duty ever exceeds that ceiling, select a standard type instead. The 3/8in port and metal bowl suit general industrial frames, and the fitted NPT-thread gauge reads in MPa/psi. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator. For maintenance, the individual elements are GAF300-10, GAR300-10 and GAL300-10. Keep in mind the 0.4 MPa ceiling is 44% of the standard 0.9 MPa maximum.
AirtacDistr lists every GAC300-10 order code with its price on one page at https://airtacdistr.com/products/airtac-gac300-10-three-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 1300 g, holds 60 cc of condensate and 98 cc of oil, and uses ISO VG 32 lubricant.
The automatic drain expels condensate from the 60 cc sump whenever it accumulates, requiring no manual intervention. The metal bowl provides a robust housing for the 40 um filter element in demanding industrial settings.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.