verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC300 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC300C10LWTK

The AirTAC GAC F.R.L. Unit GAC300C10LWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size3/8"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialMetal
  • Drainsemi-auto + manual
  • Pressure gaugeCircular, psi / bar
  • Weight1300 g
$103.78 $111.28Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC300-10 bowl, type and element option on one page All GAC300-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC300C10LWTK

Delivering cleaned, regulated and lubricated air in a single sequence, this AirTAC GAC300C10LWTK combines a filter, regulator and lubricator on one L-shape bracket with quick mounting clamps. The 3/8in port serves a 1300 g assembly that conditions air for downstream pneumatics. Because the build order passes air through the filter before the regulator, and adds oil mist last, the regulator seat stays clean. This unit carries a 5 um element for fine particle capture and a metal bowl.

Configured for low-pressure duties, the regulator operates within 0.15-0.4 MPa (20-58 psi). A circular gauge is fitted, reading MPa/psi for the default NPT thread, so operators can verify the setpoint directly. The unit includes a reverse-flow (reflux) valve, which the catalogue shows as a separate pneumatic symbol with details on its own page. Condensate is managed by a semi-auto and manual drain pair, and the 60 cc drain bowl alongside the 98 cc oil bowl sets the maintenance interval.

Airtac GAC F.R.L. Unit GAC300C10LWTK Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC300C10LWTK
SeriesGAC300 F.R.L. combination
Port size3/8" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialMetal
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
Capacity of oil bowl98 cc
Recommended lubricantISO VG 32 or equivalent
Weight1300 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.

Model Code: Airtac GAC F.R.L. Unit GAC300C10LWTK

GAC300GA300 series F.R.L. unit — sets ports, bowl capacity and weight.
CBowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N).
10Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
(blank)Drain: Semi-auto drain + manual drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
KReverse-flow (reflux) valve attached.

Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC300 · 3/8" · curve to 3000 L/min
One size downGAC200
One size upGAC400 (curve to 6000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC300C10LWTK Is Used

science

Laboratory Pneumatics

Feeds low-pressure air to sensitive analytical instruments and glassware handling actuators that require finely filtered, lubricated air.

precision_manufacturing

Textile Spinning Frames

Regulates the 0.15-0.4 MPa supply for delicate tensioning cylinders and air-jet nozzles where a 5 um element protects fine orifices.

handyman

Light Assembly Jigs

Conditions air for small pick-and-place grippers and low-force clamping fixtures that depend on stable sub-0.4 MPa pressure.

Is the Airtac GAC F.R.L. Unit GAC300C10LWTK the Right Air-Prep Unit?

Choose this specific configuration when a machine requires precision filtration and low outlet pressure. The 5 um element traps far finer particles than the standard 40 um grade, suiting sensitive instrumentation, but it will require more frequent element service. The metal bowl offers a robust housing option, though buyers should confirm compatibility with aggressive surroundings as no chemical or impact data is printed. If the downstream line must remain oil-free, this lubricator must be omitted and a separate filter-regulator chosen instead. The three units are separately orderable as GAF300-10, GAR300-10 and GAL300-10, so a clogged element does not mean replacing the whole assembly.

Stepping down to the GAC200 body drops the plotted flow envelope from 3000 L/min to 1750 L/min at 0.7 MPa inlet, whereas this 1300 g unit suits heavier frame mounts. Finally, the 0.4 MPa ceiling of this L type is 44% of the Standard type's 0.9 MPa maximum.

AirtacDistr lists every GAC300-10 order code with its price on one page at https://airtacdistr.com/products/airtac-gac300-10-three-unit-frl

Quick checklist

  • ✓ Body size for your peak flow (3/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 1300 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC300C10LWTK FAQ

This lower-pressure type regulates from 0.15-0.4 MPa (20-58 psi). The maximum pressure is 1.0 MPa (145 psi) and the proof pressure is 1.5 MPa (215 psi). It operates from -5 to 70 C, uses a 60 cc drain bowl and a 98 cc oil bowl, weighs 1300 g, and requires ISO VG 32 or equivalent lubricant.

The reverse-flow (reflux) valve is fitted to this unit, appearing as a distinct pneumatic symbol in the catalogue. For condensate management, it ships with both a semi-auto drain, which dumps water on each pressure drop, and a manual drain for on-demand emptying.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC300C10LWTK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.