verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC300 · F.R.L. Combination (filter + regulator + lubricator)

AirTAC GC300-08 FRL Unit (GC30008AF1T)

The AirTAC GC300-08 FRL Unit (GC30008AF1T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT1/4"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade40 µm
  • DrainAutomatic drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$121.11 $128.61Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC300-08 drain, gauge and thread option on one page All GC300-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GC300-08 FRL Unit (GC30008AF1T)

GC30008AF1T is a three-unit AirTAC G-series F.R.L. combination - separate filter, regulator and lubricator assembled as one set for 1/4 in (NPT1/4) ports. This configuration uses the standard 40 um filter element, an automatic-drain bowl that clears condensate on its own, and the embedded square pressure gauge scaled in MPa, giving a complete clean-air, set-pressure, oil-mist station from a single part number.

This is a genuine AirTAC part. The G series is offered in 200, 300, 400 and 600 sizes, works on compressed air only up to 1.0 MPa (145 psi) and -5 to 70 C, and uses polycarbonate bowls at the 300 size. Flow is published as curves rather than a single rating, so we confirm flow and other datasheet figures on request. This version has NPT ports (the T in the order code) for North American pipe fittings.

AirTAC GC300-08 FRL Unit (GC30008AF1T) Technical Specifications

ModelAirTAC GC300-08 FRL Unit (GC30008AF1T)
SeriesGC300 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT1/4" (NPT thread)
Filtering grade40 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeAutomatic drain
Bowl materialPC
Pressure gaugeFitted — square, MPa scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GC300-08 FRL Unit (GC30008AF1T)

GC300G-series F.R.L. combination, 300 body — sets the port range.
08Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
ADrain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
1Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC300 · PT1/4" · 40 µm
One size downGC200
One size upGC400
Two-unit equivalentGFC300-08
Build orderFilter → regulator → lubricator

Where the AirTAC GC300-08 FRL Unit (GC30008AF1T) Is Used

factory

Shop-air drops feeding pneumatic cylinders

On a general manufacturing floor, the set cleans, regulates and lubricates the air feeding rod and compact cylinders, with the automatic drain keeping bowls clear across long production runs.

handyman

Impact-wrench supply at vehicle service bays

Impact guns and ratchets need both clean and oiled air to last; this unit conditions the bay drop and its MPa-scale square gauge lets technicians check the set pressure instantly.

settings_input_component

Air prep upstream of directional control valves

Mounted ahead of solenoid valve manifolds on automation panels, the set protects spools and seals from water and grit while holding a fixed supply pressure for repeatable valve switching.

Is the AirTAC GC300-08 FRL Unit (GC30008AF1T) the Right Station?

Choose the 300/1/4 in step when your circuit sits in the middle of the G-series flow range; smaller 200 or larger 400/600 sizes cover lighter and heavier duty. This code carries an automatic drain (manual and differential-pressure versions also exist, with 0.15-0.9 MPa / 20-130 psi adjustment retained for automatic and differential drains), and the standard 40 um element for general-purpose protection. The embedded square gauge reads in MPa; psi (2) and bar (3) scales and an external round gauge are catalogue options. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Since AirTAC publishes flow as curves, ask us to confirm the sizing against your application before ordering.

AirtacDistr lists every GC300-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gc300-08-three-unit-frl

Quick checklist

  • ✓ Body size for your peak flow (PT1/4" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.

AirTAC GC300-08 FRL Unit (GC30008AF1T) FAQ

AirTAC states G-series performance as flow curves, not a single rated number, so quoting one figure would be misleading. Tell us your flow and pressure conditions and we will confirm the unit against the datasheet curves on request before you order.

Yes - on this code the embedded square gauge is scaled in MPa. Psi (scale 2) and bar (scale 3) versions, plus an external round gauge, are catalogue options you can specify when ordering. With the automatic drain fitted, the regulator adjusts from 0.15-0.9 MPa (20-130 psi).

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GC300-08 FRL Unit (GC30008AF1T)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.