
The AirTAC GC300-08 FRL Unit (GC30008AF1WTK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator that together clean, regulate and oil-mist lubricate compressed air for pneumatic equipment. This GC30008AF1WTK is built in the 300 size with NPT1/4 ports, an automatic drain on the filter bowl, a 5 um filter element, an embedded square pressure gauge with an MPa scale, and a reverse flow check valve fitted. Maximum working pressure is 1.0 MPa (145 psi); with the automatic drain, the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi). The filter bowl in the 300 size is PC (polycarbonate), and the temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The G series spans 200/300/400/600 sizes with ports from 1/8 to 1 inch, three thread types (NPT on this code), and choices of drain type, filter grade, gauge style and scale, and check valve. Flow is published as curves rather than a single rating, so we confirm flow and full datasheet figures on request.
| Model | AirTAC GC300-08 FRL Unit (GC30008AF1WTK) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/4" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-08 |
| Build order | Filter → regulator → lubricator |
Filtered, regulated and lubricated air feeding pallet clamps, tool-change cylinders and spindle clean-blast lines on a machining center, with the 5 um element protecting fine-clearance valves.
Conditions the supply to gripper cylinders and ejector feed lines on a robotic handling cell, where consistent lubrication keeps small control valves cycling cleanly.
Prepares atomizing and actuation air for spray guns and fluid valves in a paint line, with the check valve helping hold the set pressure if upstream supply dips.
The 300 size with NPT1/4 ports is the mid step in the G series; move to 400 or 600 for larger ports and flow, or 200 for compact lines. The automatic drain sheds bowl condensate without operator attention; manual (M) and differential-pressure (blank) variants are available if you prefer. The W element filters to 5 um instead of the standard 40 um, which suits fine-clearance downstream valves. The embedded square gauge reads in MPa; This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Because AirTAC publishes G-series flow as curves, not a single rated figure, ask us to confirm sizing against your application before ordering.
AirtacDistr lists every GC300-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gc300-08-three-unit-frl
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.
AirTAC publishes G-series capacity as flow curves rather than one rated number, so no single figure is quoted here. Tell us your line pressure and air demand and we will confirm the sizing and flow from the datasheet on request.
The W code fits a 5 um element in place of the standard 40 um grade. Choose it when the machine downstream has fine-clearance spool valves, ejectors or spray passages that need cleaner air; both grades are catalogue options on this unit.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.