
The AirTAC GC300-08 FRL Unit (GC30008F1TK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC30008F1TK is a GC-series three-unit F.R.L. combination for 1/4 inch G (BSPP) ports in size 300, with the K suffix meaning a reverse/check valve is fitted in the set. The filter stage uses the standard 40 um element with a differential-pressure drain, the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi) with a square MPa gauge included, and the lubricator meters oil mist downstream. Maximum inlet pressure is 1.0 MPa (145 psi), temperature range is -5 to 70 C, and the bowls are PC (polycarbonate) at this size.
This is a genuine AirTAC part. The G series covers sizes 200 to 600 with ports from 1/8 to 1 inch, and the check valve, drain type, 5 um element, gauge scale and G or NPT threads are all orderable options. AirTAC publishes flow as curves rather than a single rating, so we confirm the datasheet figures for your application on request.
| Model | AirTAC GC300-08 FRL Unit (GC30008F1TK) |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/4" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-08 |
| Build order | Filter → regulator → lubricator |
Conditions and regulates the pilot supply to pneumatically actuated valves in a plant room, with the K-suffix check valve built into the set for circuits that should not back-feed.
Feeds filtered, regulated, lubricated air to the gripper circuit of a robot cell, with the set pressure held steady through repeated pick-and-place cycles.
Serves as the treated air point at wall-mounted maintenance drops around a factory floor, where hoses and impact tools are connected throughout the day.
Choose this code when the circuit needs a reverse/check valve built into the F.R.L. set. Size 300 with 1/4 inch G ports is the mid-range step; move to 200 or 400/600 if your demand sits elsewhere. Drain is differential-pressure as decodable here (automatic or manual are options), the element is 40 um standard or 5 um with W, and gauge scale and thread (NPT on this code) complete the choices.
Flow is published as performance curves, not one rated number, so share your application conditions and we will confirm sizing against the datasheet before you order.
AirtacDistr lists every GC300-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gc300-08-three-unit-frl
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.
Flow for the GC series is published as performance curves rather than a single rated figure, so we do not state one number. Tell us your working pressure and consumption and we will confirm the sizing from the datasheet on request.
K means a reverse/check valve is fitted in the set. Everything else decodes as standard: size 300, 1/4 inch G ports, differential-pressure drain, 40 um element and square MPa gauge. We can confirm check-valve details from the datasheet on request.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.