
The AirTAC GFC300-15 Combination Unit (GFC30015AC3WT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC is a two-unit treatment set pairing a filter-regulator with a separate lubricator: it removes water and particulate, regulates pressure and meters oil mist in one compact arrangement. This GFC30015AC3WT is the 300 size with 1/2 inch NPT ports, an automatic drain, a fine 5 um filter element (the W variant) and a round gauge scaled in bar. With automatic drain the regulator adjusts 0.15-0.9 MPa (20-130 psi); maximum working pressure is 1.0 MPa (145 psi). The 300-size bowl is polycarbonate.
This is a genuine AirTAC part from the G series, available in sizes 200 through 600 with ports from 1/8 inch to 1 inch in three thread types (NPT on this code). Flow is published as curves rather than a single rated figure, so we confirm flow and datasheet details on request.
| Model | AirTAC GFC300-15 Combination Unit (GFC30015AC3WT) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-15 filter regulator and GL300-15 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/2" · 5 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-15 |
| Build order | Filter regulator first, lubricator last |
Preparing air for lab instruments and analytical equipment where the 5 um element gives finer particle removal ahead of regulation and lubrication on a dedicated 1/2 inch NPT drop.
Conditioning branch air on finishing and coating lines where finer filtration ahead of spray and actuation points helps protect the finish quality.
Air supply to precision assembly stations and small pneumatic tooling, with the automatic drain clearing condensate and the regulator holding the set pressure.
Size: step between 200/300/400/600 against pipe size and air demand - this set is 300 with NPT1/2 ports. Drain: automatic here; manual and differential-pressure are the other options. Filter grade is the key choice on this model: the W suffix gives 5 um filtration instead of the standard 40 um, so select it where downstream equipment needs finer particle removal. Gauge: external round, bar scale; square-gauge scales are also available. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Flow is published as curves, not a single rating, so please ask us to confirm sizing against your application before ordering.
AirtacDistr lists every GFC300-15 order code with its price on one page at https://airtacdistr.com/products/airtac-gfc300-15-two-unit-frl
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-15 filter regulator on its own.
AirTAC publishes flow for the G series as curves rather than a single rated number, so no rated figure is quoted here. Ask us and we will confirm the flow curves and datasheet details for this 300-size, 5 um set before you order.
The W in the code changes only the filter grade: 5 um instead of the 40 um standard. Choose 5 um where downstream valves, instruments or process equipment need finer particle removal; choose the standard grade for general plant air. Drain type, gauge and thread stay as ordered on the same set.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.