verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC300 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC300-15 Combination Unit (GFC30015C3T)

The AirTAC GFC300-15 Combination Unit (GFC30015C3T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT1/2"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade40 µm
  • DrainDifferential-pressure drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$80.56 $88.06Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC300-15 drain, gauge and thread option on one page All GFC300-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC300-15 Combination Unit (GFC30015C3T)

GFC is AirTAC's two-unit air preparation set: a filter-regulator and a lubricator supplied as a matched pair, so one installation point delivers filtered, regulated and lubricated compressed air to the machine. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. With the differential drain, the regulator adjustment range is 0.15-0.9 MPa (20-130 psi); maximum working pressure is 1.0 MPa (145 psi). At the 300 size both bowls are polycarbonate (PC), and the working temperature range is -5 to 70 C, non-freezing.

This is a genuine AirTAC part from the G series, which runs from the 200 size up to 600 so you can step port size to the line. Across the series you can order manual or automatic drain versions, a 5 um element (code W), G (BSPP) or NPT threads, and bracket mounting. Flow is published as curves rather than a single rating, so we confirm the figures and datasheet details for your application on request. Order code GFC30015C3T has NPT ports (the T in the code) for North American pipe fittings.

AirTAC GFC300-15 Combination Unit (GFC30015C3T) Technical Specifications

ModelAirTAC GFC300-15 Combination Unit (GFC30015C3T)
SeriesGFC300 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT1/2" (NPT thread)
Filtering grade40 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeDifferential-pressure drain
Bowl materialPC
Pressure gaugeFitted — round, bar scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC300-15 Combination Unit (GFC30015C3T)

GFC300G-series two-unit set, 300 body — sets the port range.
15Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
(blank)Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
CGauge shape: Round. C is round, F is square.
3Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-15 filter regulator and GL300-15 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC300 · PT1/2" · 40 µm
One size downGFC200
One size upGFC400
Three-unit equivalentGC300-15
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC300-15 Combination Unit (GFC30015C3T) Is Used

factory

Bottling line capper

Conditions the air feeding the capping heads and bottle-grip cylinders on a filling line, with pressure set at the section inlet and lubrication for the actuator seals.

valve

Pneumatic actuator skid

Prepares the supply to quarter-turn actuators and positioners on a process skid, giving filtered, regulated and lubricated air at a single tie-in point.

speed

High-cycle sorting gates

Feeds the diverter gates and pusher cylinders of a high-cycle sorting conveyor, where the lubricator supports long duty cycles on the actuated gates.

Is the AirTAC GFC300-15 Combination Unit (GFC30015C3T) the Right Set?

The 300 body with 1/2 in NPT ports suits lines that have outgrown the smaller 200 and 300-08/10 steps. The filter element here is the standard 40 um; the W variant carries a 5 um element if you need finer filtration. Drain is differential-pressure as coded, with manual (M) and automatic (A) versions available. The gauge on this model is a round external unit reading in bar, which suits European-style drawings; psi and MPa scales and a square gauge are catalogue alternatives. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rated number, so send us your demand and pressure and we will confirm sizing from the datasheet before you order.

AirtacDistr lists every GFC300-15 order code with its price on one page at https://airtacdistr.com/products/airtac-gfc300-15-two-unit-frl

Quick checklist

  • ✓ Body size for your peak flow (PT1/2" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-15 filter regulator on its own.

AirTAC GFC300-15 Combination Unit (GFC30015C3T) FAQ

AirTAC publishes G-series flow as performance curves rather than a single rated figure, so we do not quote a rated flow here. Tell us your required flow and working pressure and we will confirm sizing from the datasheet on request before you order.

C is the round external pressure gauge and 3 is the bar scale, so the setpoint is read in bar. C2 reads in psi and F1 is a square gauge scaled in MPa; with no gauge letter, the unit carries the embedded square gauge.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC300-15 Combination Unit (GFC30015C3T)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.