verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC600 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC600-20 Combination Unit (GFC60020AF1TK)

The AirTAC GFC600-20 Combination Unit (GFC60020AF1TK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/4" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT3/4"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade40 µm
  • DrainAutomatic drain
  • Bowl materialAluminium alloy
  • Pressure gaugeFitted
  • ThreadNPT
$225.64 $233.14Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC600-20 drain, gauge and thread option on one page All GFC600-20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC600-20 Combination Unit (GFC60020AF1TK)

GFC60020AF1TK is an AirTAC GFC two-unit set for compressed air: a 600-size filter regulator paired with a lubricator, so one order covers water and particulate removal, pressure regulation and oil-mist lubrication. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

This is a genuine AirTAC part. The G series is built in 200, 300, 400 and 600 sizes with ports from 1/8 in. to 1 in. at 600 size the bowls are aluminium alloy, working pressure is up to 1.0 MPa (145 psi), temperature range is -5 to 70 C, and the regulator adjusts 0.15-0.9 MPa (20-130 psi) on this automatic-drain version. Rated flow is published as curves rather than a single figure; ask us and we will confirm the datasheet figures for your application.

AirTAC GFC600-20 Combination Unit (GFC60020AF1TK) Technical Specifications

ModelAirTAC GFC600-20 Combination Unit (GFC60020AF1TK)
SeriesGFC600 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT3/4" (NPT thread)
Filtering grade40 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeAutomatic drain
Bowl materialAluminium alloy
Pressure gaugeFitted — square, MPa scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC600-20 Combination Unit (GFC60020AF1TK)

GFC600G-series two-unit set, 600 body — sets the port range.
20Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1".
ADrain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
1Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-20 filter regulator and GL600-20 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC600 · PT3/4" · 40 µm
One size downGFC400
Three-unit equivalentGC600-20
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC600-20 Combination Unit (GFC60020AF1TK) Is Used

build

Pneumatic impact wrenches at vehicle repair bays

Feeds impact guns and ratchets at a service bench with filtered, regulated and oil-mist-lubricated air; the check valve stops air from back-feeding through the set from the tool side.

factory

Pneumatic clamp cylinders on a panel press line

Supplies clamping cylinders on a furniture press, with the regulator set to the clamp circuit pressure and the 40 um element catching pipe scale and carried-over water.

conveyor_belt

Actuated diverters on a bottling conveyor

Keeps the pusher cylinders that move bottles between lanes supplied with clean, regulated, lubricated air across a shift while the automatic drain clears the bowl on its own.

Is the AirTAC GFC600-20 Combination Unit (GFC60020AF1TK) the Right Set?

Size 600 with a NPT3/4 port is the step to take when your circuit is built around 3/4 in. piping and higher air demand; smaller 200-400 sizes use smaller ports and suit lighter duties. The A in the code gives an automatic drain, so condensate leaves the bowl without operator attention, and this drain type carries the 0.15-0.9 MPa (20-130 psi) adjustment range. The 40 um standard element suits general plant air; choose W for 5 um. The F1 gauge is the embedded square gauge on an MPa scale (F2/F3 give psi/bar). This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G and NPT are catalogue options.

Flow for this family is published as curves, not a single rating, so ask us to confirm sizing against your pressure and demand before ordering.

AirtacDistr lists every GFC600-20 order code with its price on one page at https://airtacdistr.com/products/airtac-gfc600-20-two-unit-frl

Quick checklist

  • ✓ Body size for your peak flow (PT3/4" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-20 filter regulator on its own.

AirTAC GFC600-20 Combination Unit (GFC60020AF1TK) FAQ

AirTAC publishes G-series flow as performance curves, not a single rated figure, so we do not quote a number here. Tell us your working pressure and air demand and we will confirm the datasheet curve for this 600-size, NPT3/4 set before you order.

K means a reverse-flow (check) valve is fitted, so air cannot flow back through the set. Drop the K for the standard version, and if you need psi or bar on the square gauge instead of MPa, the catalogue scales are 2 and 3.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC600-20 Combination Unit (GFC60020AF1TK)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.