verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC GC300 · F.R.L. Combination (filter + regulator + lubricator)

GC30008MF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um

The AirTAC GC30008MF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT1/4"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade5 µm
  • DrainManual drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$122.34 $129.84Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC300-08 drain, gauge and thread option on one page All GC300-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the GC30008MF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um

The GC30008MF2WTK is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The bowl is polycarbonate with a manual drain, so condensate is emptied by hand on a maintenance schedule. The regulator is the standard type with a 0.05-0.9 MPa (7-130 psi) adjustment range, and the fitted square gauge reads in psi so downstream pressure can be set and checked directly. A reverse/check valve is fitted, and the set includes a mounting bracket.

This is a genuine AirTAC part. The GC family spans the 200, 300, 400 and 600 sizes with a choice of ports, thread options (NPT on this code), drain types, filter grades and gauge scales. Because AirTAC publishes flow as curves rather than a single rated figure, we confirm flow and other datasheet values for your application on request.

GC30008MF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um Technical Specifications

ModelGC30008MF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um
SeriesGC300 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT1/4" (NPT thread)
Filtering grade5 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialPC
Pressure gaugeFitted — square, psi scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: GC30008MF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um

GC300G-series F.R.L. combination, 300 body — sets the port range.
08Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
2Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC300 · PT1/4" · 5 µm
One size downGC200
One size upGC400
Two-unit equivalentGFC300-08
Build orderFilter → regulator → lubricator

Where the GC30008MF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um Is Used

precision_manufacturing

CNC machining centre air supply

Feeds clean, regulated and lubricated air to tool-changer cylinders and clamping fixtures on a machining cell, with the 5 um element protecting fine-clearance valves.

factory

Paint and coating spray lines

Supplies filtered, pressure-set and oil-misted air to spray guns and atomising stations in a finishing shop, where water and particulate in the air line ruin finish quality.

conveyor_belt

Packaging line pneumatic actuators

Conditions the air feeding pick-and-place cylinders and sealing jaws on a packaging conveyor, keeping seals lubricated and actuator pressure held steady through the shift.

Is the GC30008MF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um the Right Station?

Start with the size and port: the 300 size with a 1/4 in NPT port suits lines running moderate air demand; step up to 400 or 600 where flow is higher. Choose the drain to match access: manual (this model) needs someone to bleed the bowl, while automatic and differential-pressure drains discharge condensate without attention. The 5 um element here is the finer choice; the 40 um standard grade suits general plant air. The square gauge is fitted in psi; MPa and bar scales and an external round gauge are alternatives. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

Before ordering, ask us to confirm sizing: AirTAC publishes flow as curves, not a single rating, so we will check the curve data against your actual air demand.

AirtacDistr lists every GC300-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gc300-08-three-unit-frl

Quick checklist

  • ✓ Body size for your peak flow (PT1/4" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.

GC30008MF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um FAQ

AirTAC publishes flow for the GC300 as curves, not as a single rated figure, so we do not quote a number. Send us your application details and we will confirm the flow from the datasheet curves and check the sizing against your demand before you order.

This unit's bowl drains by hand: an operator opens the drain at intervals to empty collected condensate. It suits points that are checked during routine maintenance. If the installation is unattended or condensate builds quickly, ask about the automatic or differential-pressure drain variants of the same set.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for GC30008MF2WTK AirTAC F.R.L. Combination, NPT1/4, 5 um

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.