AirTAC 4V230P-08 Solenoid Valve, 4V200 Series (4V230P08E-W)
The AirTAC AirTAC 4V230P-08 Solenoid Valve, 4V200 Series (4V230P08E-W) is a genuine 5/3-way 5/3 double solenoid — exhaust center solenoid valve with W ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
- Valve type5/3-way
- Function5/3 double solenoid — Exhaust center
- Port sizeW
- Effective area13.6 mm²
- Flow (Cv)0.8
- Series4V200
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC 4V230P-08 Solenoid Valve, 4V200 Series (4V230P08E-W)
Order the AirTAC 4V230P08E-W when a machine needs a 5/3 valve whose idle position leaves both cylinder chambers pressurised. Two coils pulse the spool between exhaust-and-feed positions; with both coils off, the pressure center keeps ports A and B on supply, which presses the rod side of a double-acting cylinder out to a hard stop. Effective area is 13.6 mm2, Cv 0.8, sized for the ~O32-50 mm bore range.
Mount it singly or snap it onto a 4V200 manifold base for multi-valve stations. Air is filtered by a 40 um element, lubrication is not required, and the aluminium body weighs 360 g. Replacement matching comes down to five points: body size, function, port and thread, coil voltage and entry style.
AirTAC 4V230P-08 Solenoid Valve, 4V200 Series (4V230P08E-W) Technical Specifications
| Model | AirTAC 4V230P-08 Solenoid Valve, 4V200 Series (4V230P08E-W) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Exhaust center |
| Port size | W |
| Exhaust port | W |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Flow & Coil Options
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
Model Code: AirTAC 4V230P-08 Solenoid Valve, 4V200 Series (4V230P08E-W)
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -W | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
Where the AirTAC 4V230P-08 Solenoid Valve, 4V200 Series (4V230P08E-W) Is Used
Slide table on a drilling fixture
Drives an O50 slide table (near 98 kgf thrust at 0.5 MPa) positioning housings under a drill head; the pressure-center idle keeps the table seated on its retract stop between holes.
Zipper-bag sealing bar
A short-stroke O40 cylinder presses a heated sealing bar (about 63 kgf at 0.5 MPa) on a pouch machine; Cv 0.8 fills both chambers quickly and the spool changes position in 0.05 s.
Tailgate-latch actuator on dock levellers
Energising one coil unlatches the dock-leveller lip and the other re-latches it, while the pressure-center neutral charges both lines during door cycling; the mechanical latch, not the valve, carries the load.
Is the AirTAC 4V230P-08 Solenoid Valve, 4V200 Series (4V230P08E-W) the Right Valve?
Downsizing path: a 4V100 body with Cv 0.6 suits O25-32 rods where cycle speed is modest. Upsizing: the 4V300, rated Cv 1.65, is the next step for O63 cylinders or short-stroke presses that need faster fill. For reference bores at 0.5 MPa, an O32 gives roughly 40 kgf, an O40 about 63 kgf and an O50 near 98 kgf, all inside this valve's ~O32-50 mm match. If you need the piston truly locked at center, pick the 30C closed-center variant instead.
When you swap one in, verify the 4V200 footprint, the 30P pressure-center function, the 08 port with PT thread, the DC24V coil and the terminal-box entry before ordering. A single base-mounted valve or a ganged manifold both work; the base adds a common supply and exhaust for the whole group.
Quick checklist
- ✓ Required flow (Cv) for cylinder & speed
- ✓ Function: single / double / 5-3 center
- ✓ Coil voltage (DC24 / AC220 …)
- ✓ Port thread (M5 / 1/8 / 1/4 / 3/8 / 1/2)
- ✓ Single valve or manifold base?
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.8 MPa operating pressure.
- check Match coil voltage to your controller output.
- check Use the manual override to test before powering.
- check Fit silencers or fittings to the exhaust ports.
- check Wiring by qualified personnel per AirTAC docs.
AirTAC 4V230P-08 Solenoid Valve, 4V200 Series (4V230P08E-W) FAQ
It is rated for double-acting cylinders in the ~O32-50 mm class: expect about 40 kgf push from an O32, 63 kgf from an O40 and 98 kgf from an O50 at 0.5 MPa. Flow capacity is 13.6 mm2 effective area (Cv 0.8) through 1/4in PT ports, with a 0.15-0.8 MPa working pressure, 1.2 MPa proof pressure and switching in 0.05 s or less.
Confirm all five code segments: the 4V200 body, the 30P pressure-center function, the 08 port with PT (Rc tapered) thread, the B voltage (DC24V, 3.0 W per coil) and the terminal-box entry. Also check whether your old valve ran internal or external pilot and whether it sat on a manifold base, since the 4V200 base is shared across the family.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 4V Valves
Request a Quote for AirTAC 4V230P-08 Solenoid Valve, 4V200 Series (4V230P08E-W)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.