
The AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008E-W) is a genuine 5/2-way single solenoid (spring return) solenoid valve with PT1/4 ports and an effective area of 17.0 mm² (Cv 1.0). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V21008E-W is a 5/2-way single-solenoid valve in the 4V200 body family, built around an AC24V coil drawing 5.0 VA and wired through a terminal box. Because it carries the -W external-pilot option, its pilot air is supplied through a separate external port rather than tapped internally from the main line - so the spool still shifts dependably on low-pressure mains or in vacuum / low-pressure circuits where an internally piloted valve would hesitate. The single-coil spring-return design needs a continuous electrical signal to stay shifted; remove the signal and the internal spring sends the spool back, which makes fail-position behaviour predictable on double-acting cylinders and actuators.
With an effective area of 17.0 mm2 (Cv 1.0) and a switching rate of up to 5 cycles per second, this mid-size body suits double-acting cylinders of roughly O32-50 mm bore. The 4V210 spool assembly weighs just 220 g and responds in 0.05 s or less, and the PT 1/4" tapered ports mate directly with standard Rc fittings. Lubrication is not required - clean, 40 um-filtered air is all it asks for.
| Model | AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008E-W) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Single solenoid (spring return) |
| Port size | PT1/4 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 17.0 mm² (Cv 1.0) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 220 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 17.0 mm² |
|---|---|
| Flow coefficient | Cv 1.0 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 1 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
External pilot supply keeps the spool switching cleanly on production lines where main-line pressure runs low or fluctuates - a job an internally piloted 4V210 can struggle with.
Drives O32-50 mm double-acting cylinders on pushers and lifts; the spring-return spool retracts the actuator automatically the moment the AC24V signal drops, no second coil needed.
Terminal-box wiring and PT 1/4" ports make it a direct workhorse for clamp and eject cylinders on assembly fixtures, switching up to 5 cycles per second with a 0.05 s response.
Size the valve to the cylinder before anything else: step down to the 4V100 (Cv 0.6) if your bore sits below ~O32 mm and speed is not critical, and step up to the 4V300 (Cv 1.65) for larger bores or faster cycle times. Within the 4V200 family, choose this single-solenoid version when you want the cylinder to return automatically on signal loss; pick a double-solenoid 4V220 when you need a memory function that holds its last pulsed position, or a 4V230C/E/P 5/3 version when mid-position hold, float or pressurise behaviour matters (note the 5/3 variants give up some flow: 13.6 mm2 / Cv 0.8 and 3 cycles per second). A single valve on its own base suits isolated stations, while a manifold base lets several 4V200 valves share one supply and wiring point.
Replacing an existing unit? Match all five points: body size (4V200), function (single 5/2 spring return), port and thread (1/4" PT - Rc tapered), coil voltage (AC24V, 5.0 VA) and electrical entry (terminal box). Also confirm the external pilot arrangement, since this -W variant ports its pilot supply separately.
Quick checklist
It directs compressed air to double-acting cylinders and actuators (not single-acting types) with an effective area of 17.0 mm2 (Cv 1.0), suiting bores of roughly O32-50 mm. The -W suffix makes it an external-pilot valve: pilot air arrives via a separate external port instead of being tapped from the main supply, so switching stays reliable on low-pressure or vacuum service. Do not use the valve by itself as a load-holding brake - for suspended loads, add pilot-operated check valves at the cylinder ports.
The coil needs a continuous AC24V signal (5.0 VA) to hold the valve in its shifted position. De-energise the coil and the internal spring immediately returns the spool, sending the cylinder back to its rest stroke. This automatic return is the key difference from the double-solenoid 4V220, which remembers its last position instead - useful when a de-energised cylinder must keep moving rather than retract.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.