This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACE32X110B — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACE32X110B in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP32X110B
The AirTAC Airtac ACP Compact Cylinder ACP32X110B is a double acting DIN-standard tight/compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE32X110B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → ACE32X110B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP32X110B
The ACP32X110B is a double acting compact cylinder in the AirTAC ACP DIN-standard family, with a 32 mm bore, 110 mm stroke and a male rod thread (the B code). It pushes 402.1 N and pulls 345.6 N at 0.5 MPa, rising to 563 N on extension at 0.7 MPa, with a theoretical ceiling of 82 kgf at 1.0 MPa. Its hard-anodized aluminium body and S45C hard-chrome rod run on 0.15-1.0 MPa (22-145 psi) of filtered air at 30-500 mm/s, with a fixed TPU bumper at each end. Note that no magnet is fitted: the optional -S code is what enables CMSE / DMSE switch sensing.
Because the short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, this 110 mm stroke fits shallow slides, guarding and gantry axes where a full-length body would not. In practice, plan on roughly 241 N of usable push at 0.5 MPa, which lifts about 20 kg vertically with a 2:1 margin - enough for a loaded palletizing fixture or a clamped aluminium casting. This model is discontinued; the current-production drop-in is ACE32X110, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP32X110B Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP32X110B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE32X110B |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE32X110B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
The ACE32X110B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP32X110B
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP32X110B Is Used
CNC fixture clamping
A 402.1 N push at 0.5 MPa clamps machined aluminium housings in a 3-axis fixture, and the short body fits inside the fixture base plate.
Conveyor push-off arm
The 110 mm stroke kicks cartons off a packaging line belt at 30-500 mm/s, with the male rod thread taking an I or Y knuckle.
Small press ejection
About 20 kg of vertical lift capacity at a 2:1 margin ejects stamped brackets from a benchtop die set.
Replacing the Airtac ACP Compact Cylinder ACP32X110B with the ACE32X110B
Size against the load: the 20 mm bore delivers 157.1 N at 0.5 MPa and the 40 mm bore reaches 628.3 N, so pick the 32 mm when your work sits near the 241 N usable band. The 110 mm stroke sits inside the 200 mm standard range for this bore, so no made-to-order build is needed. Remember the rod drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and CA/CB clevis brackets bolt to the same face, and the optional -S magnet pairs with CMSE / DMSE switches. Order ACE32X110 as the current replacement.
Replacement checklist
- ✓ Current-production ACE → ACE32X110B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP32X110B FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa, 563 N push and 483.8 N pull; theoretical maximum is 82 kgf at 1.0 MPa. It is double acting with a 32 mm bore, 110 mm stroke, 12 mm rod, 1/8" PT port, 0.15-1.0 MPa (22-145 psi) working pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C range and 30-500 mm/s speed.
No - the ACP family is discontinued. The current-production drop-in is ACE32X110, the ISO 21287 successor in the same bore, stroke and force class. Because the ACP was DIN-standard, confirm the ISO 21287 mounting dimensions and the FA/FB, LB or CA/CB bracket fit before swapping. If you need position sensing, order the -S version so CMSE / DMSE switches can be used.
Related AirTAC ACE Cylinders
Request a Quote for the ACE32X110B
Send us the quantity and destination. We confirm price, stock and lead time on the ACE32X110B replacement — usually within 7-8 hours.