This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACE32X175 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACE32X175 in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP32X175
The AirTAC Airtac ACP Compact Cylinder ACP32X175 is a double acting DIN-standard tight/compact air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE32X175 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → ACE32X175
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP32X175
Double acting and DIN-standard compact, the ACP32X175 pushes with 402.1 N and pulls with 345.6 N at 0.5 MPa, rising to 563 N at 0.7 MPa. Its short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so a 175 mm stroke still fits shallow jigs and sliding guards. Air supply is 0.15-1.0 MPa (22-145 psi) with speed from 30-500 mm/s.
This model is discontinued; the current-production drop-in is ACE32X175, which matches the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping. The body is hard-anodized aluminium with an S45C hard-chrome rod and fixed TPU bumpers at both ends. In practice, plan for about 241 N of usable push at 0.5 MPa, which lifts roughly 20 kg vertically with a 2:1 margin. The optional -S magnet code enables CMSE / DMSE switches; without it there is no magnet.
Airtac ACP Compact Cylinder ACP32X175 Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP32X175 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE32X175 |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE32X175 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
The ACE32X175 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP32X175
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP32X175 Is Used
Fixture clamping on CNC pallets
About 241 N of usable push at 0.5 MPa clamps aluminium brackets in machining fixtures, and the short body fits inside the pallet footprint.
Packaging line pushers
The 175 mm stroke kicks cartons off a conveyor between stops, with the fixed TPU bumper softening the end-of-stroke contact at up to 500 mm/s.
Electronics enclosure latches
Compact 32 mm bore actuation latches sliding doors on test racks, where the short ISO 21287-class body clears cable trays and guards.
Replacing the Airtac ACP Compact Cylinder ACP32X175 with the ACE32X175
At 32 mm bore the ACP32X175 sits mid-range: a 25 mm bore gives 245.4 N push at 0.5 MPa if the load is lighter, while a 40 mm bore reaches 628.3 N for heavier clamping. If the load must stay put when air is lost, add a rod lock or pilot check valve - the piston drifts on its own. FA/FB flange, LB foot and CA/CB clevis mountings plus M8x1.25 female rod thread suit standard fixtures; order the -S code if you need CMSE / DMSE position switches. Buy ACE32X175 as the current replacement.
Replacement checklist
- ✓ Current-production ACE → ACE32X175
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP32X175 FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa that rises to 563 N push and 483.8 N pull. Theoretical maximum is 82 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and speed spans 30-500 mm/s.
Order ACE32X175, the current-production ISO 21287 successor: swap the P for an E and you get the same 32 mm bore, 175 mm stroke and force class in a matching short body. Confirm the ISO 21287 mounting dimensions before the swap, since the ACP was built to a DIN standard, and remember the magnet is only present when the -S code is ordered.
Request a Quote for the ACE32X175
Send us the quantity and destination. We confirm price, stock and lead time on the ACE32X175 replacement — usually within 7-8 hours.