This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACE32X200S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACE32X200S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP32X200S
The AirTAC Airtac ACP Compact Cylinder ACP32X200S is a double acting DIN-standard tight/compact air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE32X200S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → ACE32X200S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP32X200S
A double acting compact cylinder built to the DIN-standard short-body format, the ACP32X200S pairs a 32 mm bore with a 200 mm stroke and a 12 mm hard-chrome S45C rod. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N, rising to 563 N at 0.7 MPa, with a theoretical ceiling of 82 kgf at 1.0 MPa. Its hard-anodized aluminium body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight gantries and guarding where a full-length body cannot.
This unit carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clamped straight onto the barrel for end-of-stroke sensing. For planning, treat about 241 N (0.6 of the push figure) as the usable working force at 0.5 MPa, which lifts roughly 20 kg vertically with a 2:1 margin. The ACP32X200S is discontinued; the current-production drop-in is ACE32X200, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP32X200S Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP32X200S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE32X200S |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE32X200S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
The ACE32X200S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP32X200S
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP32X200S Is Used
Fixture clamping on CNC pallets
The 402.1 N push at 0.5 MPa clamps aluminium housings in machining fixtures, and the short body fits inside the pallet footprint.
Small-part press fitting
About 241 N of usable working force seats bearings and bushings into plastic pump bodies on a 200 mm approach stroke.
Position-checked ejector
With the -S magnet fitted, CMSE / DMSE switches confirm the rod has fully retracted before the conveyor indexer advances.
Replacing the Airtac ACP Compact Cylinder ACP32X200S with the ACE32X200S
Size both ways before ordering: the 25 mm bore gives 245.4 N push at 0.5 MPa if your load is lighter, while the 40 mm bore delivers 628.3 N if you need more headroom. Note that a plain cylinder of this type drifts when air is lost, so add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and CA/CB clevis mounts plus the fitted -S magnet for CMSE / DMSE switches round out the spec. Order the ACE32X200 as the current replacement.
Replacement checklist
- ✓ Current-production ACE → ACE32X200S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP32X200S FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa it pushes 563 N and pulls 483.8 N; the theoretical maximum is 82 kgf at 1.0 MPa. The model is discontinued, and the current-production replacement is ACE32X200 in the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping.
The hard-anodized aluminium body follows the ISO 21287 compact format, cutting about 50% of the mounting length compared with an ISO 15552 profile cylinder. Air ports are 1/8" on this 32 mm bore, the rod end carries a female M8x1.25 thread, and FA/FB flange or LB foot mounts bolt to standard fixtures. A fixed TPU bumper at each end limits end-of-travel shock while speed runs 30-500 mm/s.
Related AirTAC ACE Cylinders
Request a Quote for the ACE32X200S
Send us the quantity and destination. We confirm price, stock and lead time on the ACE32X200S replacement — usually within 7-8 hours.