This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACE32X200SB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACE32X200SB in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP32X200SB
The AirTAC Airtac ACP Compact Cylinder ACP32X200SB is a double acting DIN-standard tight/compact air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE32X200SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → ACE32X200SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP32X200SB
The ACP32X200SB is a double acting compact cylinder in the DIN-standard ACP series, with a 32 mm bore, 200 mm stroke, male rod thread and the optional -S magnet fitted so CMSE or DMSE switches can be mounted. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those figures rise to 563 N and 483.8 N, with a theoretical ceiling of 82 kgf at 1.0 MPa. Its hard-anodized aluminium body with an S45C hard-chrome rod runs on air filtered to 40 um, at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s.
Because the short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, this 200 mm stroke model slots into tight gantries and guarding where a full-length body will not fit. In practice, plan on roughly 241 N (about 24 kgf) of usable push at 0.5 MPa, which lifts around 20 kg vertically with a 2:1 margin. Note this model is discontinued: the current-production drop-in is the ACE32X200, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP32X200SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP32X200SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE32X200SB |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE32X200SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
The ACE32X200SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP32X200SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP32X200SB Is Used
Pick-and-place gantry lift
Lifting 15-20 kg fixture plates on a packaging machine gantry: the 402.1 N push at 0.5 MPa covers the load with margin, and the 200 mm stroke clears a tall stack in one move.
Clamping on a CNC fixture
Side clamping aluminium housings before machining: 241 N of usable force at 0.5 MPa holds the part against a stop, and the short body fits inside the fixture base where a profile cylinder cannot.
Conveyor diverter pusher
Pushing cartons off a 400 mm wide belt at a sortation point: the 200 mm stroke sweeps the full belt width, and the fitted -S magnet with a DMSE switch confirms the home position each cycle.
Replacing the Airtac ACP Compact Cylinder ACP32X200SB with the ACE32X200SB
At 200 mm stroke this is the longest standard stroke for the 32 mm bore, so no resize is needed if your travel is 200 mm or less. If 402.1 N at 0.5 MPa feels marginal, step up to the 40 mm bore (628.3 N push); if the load is light, the 25 mm bore (245.4 N) saves space. Remember a plain ACP drifts when air is lost - add a rod lock or pilot check valve for held loads. FA/FB flange, LB foot and CA/CB clevis mountings bolt to the same face family, and the -S magnet on this unit accepts CMSE / DMSE switches. Order the ACE32X200 as the current replacement and verify ISO 21287 dimensions.
Replacement checklist
- ✓ Current-production ACE → ACE32X200SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP32X200SB FAQ
At 0.5 MPa it delivers 402.1 N push and 345.6 N pull. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum is 82 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and rod speed runs 30-500 mm/s. For real work, budget about 241 N - roughly 20 kg of vertical lift with a 2:1 margin.
The ACP32X200SB is no longer in production. The current drop-in is the ACE32X200, which matches the same 32 mm bore, 200 mm stroke and force class; confirm the ISO 21287 mounting dimensions before swapping since the ACP follows the DIN standard. The -S magnet on this unit is the optional code that enables CMSE / DMSE reed or solid-state switches - it is not a standard feature on every cylinder, so keep the S in the ordering code if you need position sensing.
Related AirTAC ACE Cylinders
Request a Quote for the ACE32X200SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE32X200SB replacement — usually within 7-8 hours.