This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACE32X300S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACE32X300S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP32X300S
The AirTAC Airtac ACP Compact Cylinder ACP32X300S is a double acting DIN-standard tight/compact air cylinder with a Ø32mm bore and 300mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE32X300S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke300 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → ACE32X300S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP32X300S
The ACP32X300S is a double acting DIN-standard compact cylinder with a 32 mm bore and a 300 mm stroke, a hard-anodized aluminium body and an S45C hard-chrome rod. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those rise to 563 N and 483.8 N, with a theoretical peak of 82 kgf at 1.0 MPa. The S in the code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted directly on the body.
Its short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits long-stroke work inside tight guards and sliding gantries. Plan on roughly 241 N of real work at 0.5 MPa, and for vertical duty it lifts about 20 kg with a 2:1 margin. Note the 300 mm stroke exceeds the 200 mm standard maximum for this bore, so it is made to order. This model is discontinued: the current-production drop-in is ACE32X300, same bore, stroke and force class - confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP32X300S Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP32X300S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE32X300S |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE32X300S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
The ACE32X300S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP32X300S
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP32X300S Is Used
Bottling line pusher
With 402.1 N push at 0.5 MPa, the 32 mm bore ejects misaligned PET bottles or cartons from a conveyor lane, and the 300 mm stroke crosses a wide belt in one move.
Slide gate actuator on a filling machine
The long made-to-order stroke opens and closes a product divert gate inside a compact guarding frame where a full-length profile cylinder would not fit.
Position-monitored tray indexer
Because the -S magnet is fitted, CMSE or DMSE switches report end-of-stroke on each 300 mm tray advance, letting the PLC confirm indexing before the next cycle.
Replacing the Airtac ACP Compact Cylinder ACP32X300S with the ACE32X300S
Size both ways: a 25 mm bore gives 245.4 N push at 0.5 MPa, while a 40 mm bore reaches 628.3 N - pick the 32 mm when your load sits between those. The 300 mm stroke is non-standard for this bore (200 mm max standard), so it is built to order. This unit carries the optional -S magnet for CMSE / DMSE switches; FA/FB flange, LB foot and CA/CB clevis mountings match the ISO 21287 face. A plain cylinder does not hold load when air is lost - add a rod lock or pilot check valve for held positions. Replacement: ACE32X300.
Replacement checklist
- ✓ Current-production ACE → ACE32X300S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP32X300S FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa, 563 N push and 483.8 N pull; theoretical maximum 82 kgf at 1.0 MPa. It is double acting, 32 mm bore, 300 mm made-to-order stroke, 12 mm rod with female M8x1.25 thread, 1/8" PT ports, operating pressure 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, fixed TPU bumpers at both ends.
Order ACE32X300, the current-production ISO 21287 successor: swap the P for an E and you get the same bore, stroke and force class in a short compact body. The 300 mm stroke remains a made-to-order item. Before swapping, confirm the ISO 21287 mounting dimensions against your fixture, since the ACP was built to the older DIN standard.
Related AirTAC ACE Cylinders
Request a Quote for the ACE32X300S
Send us the quantity and destination. We confirm price, stock and lead time on the ACE32X300S replacement — usually within 7-8 hours.