Airtac GAC F.R.L. Unit GAC20008ASNK
The AirTAC Airtac GAC F.R.L. Unit GAC20008ASNK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/4"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialPC
- Drainautomatic
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC20008ASNK
Delivering cleaned, regulated and lubricated air for single actuators, this AirTAC combination pre-assembles a filter, regulator and lubricator on one L-shape bracket with quick mounting clamps. The 1/4in port serves the 750 g GAC200 body, and the 40 um element captures solid particles before air reaches the regulator seat.
Because no gauge is supplied, the 1/8in gauge connection allows adding instrumentation later to read the 0.15-0.9 MPa (20-130 psi) standard pressure range. The automatic drain clears condensate from the 25 cc bowl without an operator, and the reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue.
Airtac GAC F.R.L. Unit GAC20008ASNK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC20008ASNK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC20008ASNK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC20008ASNK Is Used
Benchtop Tool Feeds
Conditions air for individual pneumatic hand tools on an assembly bench, supplying steady pressure and oil mist through a 1/4in line.
Small Jig Cylinders
Prepares air for compact clamping jigs where a single actuator needs clean, regulated and lubricated flow to cycle reliably.
Lab Automation
Feeds low-flow test fixtures requiring 40 um filtration and automatic condensate removal during unattended overnight cycles.
Is the Airtac GAC F.R.L. Unit GAC20008ASNK the Right Air-Prep Unit?
Choose this compact 750 g unit for light-duty machines where space is tight and manual condensate draining is impractical, as the automatic drain empties the 25 cc bowl independently. The 40 um element suits general pneumatic duty, while the PT thread sets a MPa/psi gauge scale if you add one to the 1/8in connection. If the downstream line must remain oil-free, select a filter-regulator instead of this lubricator-equipped assembly. For maintenance, the GAF200-08, GAR200-08 and GAL200-08 spares share the exact same body and port suffix. Stepping up to the GAC300 roughly doubles the flow envelope to 3000 L/min at 0.7 MPa inlet compared to this body's 1750 L/min curve, but the GAC200's smaller footprint saves panel space. The 1.5 MPa (215 psi) proof pressure provides a 1.5x burst-test margin over the 1.0 MPa maximum, though it is never permission to run above 1.0 MPa.
Quick checklist
- ✓ Body size for your peak flow (1/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC20008ASNK FAQ
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, weighs 750 g, has a 25 cc drain bowl and a 36 cc oil bowl, and requires ISO VG 32 lubricant.
The N in the code means no gauge is supplied, but the body features a 1/8in gauge connection so you can install one later to monitor the 0.15-0.9 MPa range. The default PT thread dictates a MPa/psi scale for any gauge you add.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC20008ASNK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.