
The AirTAC GAC F.R.L. Unit GAC20008LNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
The GAC20008LNTK is a compact F.R.L. combination - filter, regulator and lubricator - pre-assembled on a single L-shape bracket with quick clamps, so there's no inter-unit tubing to leak. It conditions air for small machines: the filter traps water and particles, the regulator holds a stable outlet pressure, and the lubricator adds oil mist downstream of the regulator, keeping the regulator seat clean.
This lower-pressure variant regulates from 0.15 to 0.4 MPa (20-58 psi), with a 1/4in port and a 40 um element. The PC bowl holds 25 cc of condensate and the oil bowl 36 cc, and the whole unit weighs 750 g - light enough for panel mounting. No gauge is supplied, so set pressure isn't readable without adding one; the 1/8in gauge connection is there if you need it later. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC20008LNTK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feed a small pneumatic jig or fixture with regulated air at up to 0.4 MPa, where the lower pressure range protects delicate clamping components from over-pressurization.
Supply a laboratory or workshop test rig that needs stable, low-pressure air for calibration or component testing, with the 1/4in port suiting small-bore tubing.
Power a single air cylinder or rotary actuator on a light assembly station, where the 750 g weight allows mounting directly on the machine frame without heavy support.
Choose the GAC20008LNTK for a small jig or single actuator where the line must stay oil-free downstream - if that's the case, the lubricator must be omitted and a filter-regulator selected instead. The PC bowl suits general shop air; the semi-auto drain dumps condensate on each pressure drop, with a manual drain for on-demand use. The K code means a reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue. Spares are GAF200-08, GAR200-08 and GAL200-08, all sharing the same body-port suffix.
The lower-pressure ceiling of 0.4 MPa is about 44% of the standard type's 0.9 MPa maximum, so confirm the downstream demand never exceeds this before ordering.
AirtacDistr lists every GAC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gac200-08-three-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
The GAC20008LNTK operates at 0.15-0.4 MPa (20-58 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C, and it uses ISO VG 32 lubricant. The drain bowl holds 25 cc, the oil bowl 36 cc, and the unit weighs 750 g. It has a 1/4in port and a 40 um element.
The N code after the port means no gauge is supplied. The gauge connection is 1/8in, so you can add a circular gauge later if you need to read the set pressure. Without one, you cannot verify the outlet pressure visually.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.