verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC200 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC20008LWT

The AirTAC GAC F.R.L. Unit GAC20008LWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size1/4"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialPC
  • Drainsemi-auto + manual
  • Pressure gaugeCircular, psi / bar
  • Weight750 g
$67.85 $75.35Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC200-08 bowl, type and element option on one page All GAC200-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC20008LWT

Delivering cleaned, regulated and lubricated air for pneumatic setups, this assembly integrates a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. It features a 1/4in port, a 5 um element for trapping fine particles, and a lower pressure range of 0.15-0.4 MPa (20-58 psi). The build routes air through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls.

A circular gauge is fitted to read the set pressure in MPa/psi, matching the default NPT thread. Weighing 750 g with a 25 cc condensate bowl and a 36 cc oil reservoir, this compact body suits light-duty tasks. The unit carries a 1.0 MPa (145 psi) maximum pressure and a 1.5 MPa (215 psi) proof rating, operating between -5 to 70 C using ISO VG 32 lubricant. If your downstream line must remain strictly oil-free, omit the lubricator and choose a filter-regulator instead. Order code GAC20008LWT has NPT ports (the T in the code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC20008LWT Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC20008LWT
SeriesGAC200 F.R.L. combination
Port size1/4" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl25 cc
Capacity of oil bowl36 cc
Recommended lubricantISO VG 32 or equivalent
Weight750 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.

Model Code: Airtac GAC F.R.L. Unit GAC20008LWT

GAC200GA200 series F.R.L. unit — sets ports, bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
08Port size 1/4". This body offers 06 = 1/8", 08 = 1/4".
(blank)Drain: Semi-auto drain + manual drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC200 · 1/4" · curve to 1750 L/min
One size upGAC300 (curve to 3000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC20008LWT Is Used

precision_manufacturing

Precision Valve Lines

Feeds clean, finely filtered 5 um air to sensitive directional control valves in small pneumatic logic circuits where standard 40 um filtration is too coarse.

handyman

Benchtop Tool Stations

Conditions supply for single-actuator benchtop assemblies or light-duty power tools, adding a controlled oil mist to protect internal moving parts from wear.

science

Laboratory Jigs

Regulates low-pressure air down to the 0.15-0.4 MPa range for delicate clamping jigs and test fixtures that require stable, non-aggressive actuation forces.

Is the Airtac GAC F.R.L. Unit GAC20008LWT the Right Air-Prep Unit?

This model uses a PC bowl and ships with both a semi-auto and a manual drain fitted; the semi-auto dumps condensate on every pressure drop, while the manual option allows on-demand emptying. The 5 um element catches far finer particulate than the standard 40 um grade, making it ideal for precision valves, though it will require more frequent element service. For spares, the three components are separately orderable as GAF200-08, GAR200-08 and GAL200-08, meaning a clogged filter or damaged bowl does not require replacing the whole assembly. Stepping up to the GAC300 body raises the plotted flow envelope to 3000 L/min at 0.7 MPa inlet compared to this unit's 1750 L/min, roughly doubling the available capacity for larger duties. Because the lower pressure type tops out at 0.4 MPa, it operates at just 44% of the standard 0.9 MPa ceiling, so choose this only if the machine will never need higher pressure.

AirtacDistr lists every GAC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gac200-08-three-unit-frl

Quick checklist

  • ✓ Body size for your peak flow (1/4" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 25 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 750 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC20008LWT FAQ

This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C, weighs 750 g, and uses a 25 cc drain bowl alongside a 36 cc oil bowl. The recommended lubricant is ISO VG 32 or equivalent.

The L indicates the lower 0.15-0.4 MPa pressure range, making it unsuitable for systems that might ever require more than 0.4 MPa. The W denotes a 5 um filtering element, which traps finer particles than the standard 40 um grade for precision equipment but needs more frequent replacement.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC20008LWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.