Airtac GAC F.R.L. Unit GAC20008SNWK
The AirTAC Airtac GAC F.R.L. Unit GAC20008SNWK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/4"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialPC
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC20008SNWK
Delivering cleaned, regulated and lubricated air for compact pneumatics, this AirTAC F.R.L. combination pairs a 1/4" port with a 5 um element to protect sensitive valves. The standard pressure range is 0.15-0.9 MPa (20-130 psi). Because the lubricator sits last in the sequence, oil mist enters downstream of the regulator seat, preventing fouling. A reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue.
Weighing 750 g, the assembly uses quick mounting clamps on an L-shape bracket, eliminating inter-unit tubing. The PC bowl holds 25 cc of condensate and 36 cc of oil. No gauge is supplied, but a 1/8" connection allows adding one later. If the application requires oil-free output, omit the lubricator and select a dedicated filter-regulator instead.
Airtac GAC F.R.L. Unit GAC20008SNWK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC20008SNWK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC20008SNWK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC20008SNWK Is Used
Micro-Assembly Jigs
Feeds single-acting cylinders in electronic pick-and-place machines where the 5 um element protects tiny valve bores from grit.
Laboratory Air Tools
Conditions supply lines for benchtop pneumatic presses, adding necessary oil mist to keep small precision rams cycling smoothly.
Light Duty Actuation
Prepares air for small clamping fixtures on manual workstations, utilizing the compact 750 g body for tight panel mounting.
Is the Airtac GAC F.R.L. Unit GAC20008SNWK the Right Air-Prep Unit?
This 1/4" body suits single actuators or small jigs, whereas stepping up to the GAC300 increases the plotted flow envelope to 3000 L/min at 0.7 MPa inlet. The 5 um element catches far finer particulate than the standard 40 um grade, demanding more frequent service. Condensate is managed by a semi-auto and manual drain pair. Replacement parts share the 200-08 suffix: GAF200-08, GAR200-08 and GAL200-08. The proof pressure of 1.5 MPa (215 psi) provides a 1.5x burst-test margin above the 1.0 MPa (145 psi) maximum operating limit.
Quick checklist
- ✓ Body size for your peak flow (1/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC20008SNWK FAQ
It operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 25 cc drain bowl, a 36 cc oil bowl, a 5 um element, and weighs 750 g. The recommended lubricant is ISO VG 32.
The N in the product code signifies no gauge is supplied. The body has a 1/8" gauge connection, allowing operators to install a PT-threaded gauge reading MPa/psi if visual pressure monitoring is required for the application.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC20008SNWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.