Airtac GAC F.R.L. Unit GAC200C08ALN
The AirTAC Airtac GAC F.R.L. Unit GAC200C08ALN is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/4"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C08ALN
Delivering cleaned, regulated and lubricated air for light-duty pneumatics, this AirTAC GAC200C08ALN combination pre-assembles a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port pairs with a 40 um element, while the lower-pressure type restricts the operating band to 0.15-0.4 MPa (20-58 psi). Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the internal pressure springs.
The metal bowl equips this unit for rugged surroundings, and the automatic drain clears condensate from the 25 cc bowl without an operator. No gauge is supplied, but the body features a 1/8in connection if you need to add instrumentation later. Weighing 750 g, the assembly is compact enough for tight panels, and the three internal modules are separately orderable as GAF200-08, GAR200-08 and GAL200-08.
Airtac GAC F.R.L. Unit GAC200C08ALN Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C08ALN |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC200C08ALN
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C08ALN Is Used
Small Pneumatic Jigs
Feeds low-pressure air to delicate clamping jigs and small handling fixtures without overpowering the actuators.
Laboratory Automation
Conditions air for sensitive lab dispensing equipment where a strict 0.15-0.4 MPa output range is required.
Textile Machinery
Provides steady, lubricated airflow to low-force textile moving parts that cannot withstand high inlet pressures.
Is the Airtac GAC F.R.L. Unit GAC200C08ALN the Right Air-Prep Unit?
Choose this 1/4in model for single actuators or small jigs requiring a maximum 0.4 MPa outlet. If your machine might ever exceed that ceiling, the L type is the wrong part, and you should select a standard S type instead. The automatic drain is decisive for unattended or wet lines, whereas the default blank drain ships both semi-auto and manual options. Since no gauge is included, the set pressure cannot be read without adding one to the 1/8in port. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator. Keep in mind that 0.4 MPa is 44% of the standard type's 0.9 MPa ceiling.
Quick checklist
- ✓ Body size for your peak flow (1/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C08ALN FAQ
This lower-pressure unit operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 1/4in port, a 40 um element, a 25 cc drain bowl, a 36 cc oil bowl, and weighs 750 g. The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32.
The N in the product code indicates no gauge is supplied. To read the set pressure, you must add a circular gauge to the 1/8in connection on the body. The default PT thread dictates an MPa/psi scale if a gauge is installed later.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C08ALN
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.