Airtac GAC F.R.L. Unit GAC200C08ALNW
The AirTAC Airtac GAC F.R.L. Unit GAC200C08ALNW is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/4"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C08ALNW
Delivering cleaned, regulated and lubricated air for light-duty pneumatics, this GAC200 combination pre-assembles a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port pairs with a 5 um element to trap fine particulates before they reach sensitive valves. Because the lubricator sits last in the flow path, oil mist is introduced downstream of the regulator seat, preventing fouling of the pressure-control mechanism.
Configured for low-pressure duties, the unit operates from 0.15-0.4 MPa (20-58 psi) and carries a 750 g mass. The metal bowl equips the assembly for harsher industrial settings, while the automatic drain empties the 25 cc condensate sump without operator intervention. No gauge is supplied, but a 1/8in connection is provided if you need to add one to monitor downstream pressure.
Airtac GAC F.R.L. Unit GAC200C08ALNW Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C08ALNW |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC200C08ALNW
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C08ALNW Is Used
Micro-Assembly Jigs
Feeds low-pressure cylinders handling delicate electronics where a 5 um element protects tiny moving parts from abrasive dust.
Laboratory Air Tools
Conditions air for sensitive benchtop equipment operating under 0.4 MPa, relying on the metal bowl for solvent resistance.
Textile Guiding
Regulates low-tension pneumatic fingers on weaving machines, using the automatic drain to handle humid plant environments.
Is the Airtac GAC F.R.L. Unit GAC200C08ALNW the Right Air-Prep Unit?
Choose this metal-bowl assembly when a compact 1/4in line requires precise low-pressure control and fine 5 um filtration. Stepping up to the GAC300 increases the condensate sump from 25 cc to 60 cc and extends the plotted flow envelope from 1750 L/min to 3000 L/min at 0.7 MPa inlet, suiting larger actuators. If the downstream process cannot tolerate oil mist, omit the lubricator and select a dedicated filter-regulator instead. The constituent parts are individually replaceable under codes GAF200-08, GAR200-08 and GAL200-08. Keep in mind that 0.4 MPa is 44% of the standard 0.9 MPa ceiling, so verify your machinery never requires higher pressure before specifying this L-type unit.
Quick checklist
- ✓ Body size for your peak flow (1/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C08ALNW FAQ
This lower-pressure type unit regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 750 g, features a 25 cc drain bowl and a 36 cc oil bowl, and requires ISO VG 32 lubricant.
The N in the product code denotes that no circular gauge is shipped with the unit. If monitoring the 0.15-0.4 MPa setpoint is necessary, you can install one using the 1/8in gauge connection provided on the body.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C08ALNW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.