Airtac GAC F.R.L. Unit GAC200C08LNK
The AirTAC Airtac GAC F.R.L. Unit GAC200C08LNK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/4"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C08LNK
Delivering cleaned, regulated and lubricated air for light-duty pneumatics, this AirTAC GAC200C08LNK F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port pairs with a 40 um element and a lower pressure type operating range of 0.15-0.4 MPa (20-58 psi). Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling.
Weighing 750 g, the assembly features a durable metal bowl and omits the pressure gauge entirely. A 1/8in gauge connection is provided if operators choose to add instrumentation later. This variant also carries a reverse-flow (reflux) valve, which the catalogue illustrates as a separate pneumatic symbol with details on its own page.
Airtac GAC F.R.L. Unit GAC200C08LNK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C08LNK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC200C08LNK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C08LNK Is Used
Small Pneumatic Jigs
Feeds low-pressure air to delicate benchtop jigs and clamping fixtures where a 1/4in port and 40 um filtration protect sensitive moving parts.
Lab Automation
Conditions supply air for laboratory dosing cylinders operating safely under the 0.15-0.4 MPa range without risking over-pressurization.
Light Assembly Tools
Provides a steady oil-misted flow to miniature air grinders and screwdrivers in low-load electronic assembly stations.
Is the Airtac GAC F.R.L. Unit GAC200C08LNK the Right Air-Prep Unit?
Choose this 1/4in unit when a compact 750 g assembly is required for a single actuator or small jig, rather than stepping up to a GAC300 which carries a 60 cc condensate bowl versus the 25 cc capacity here. The metal bowl suits harsher environments where standard PC might not be preferred, and the semi-auto plus manual drain pair clears condensate on pressure drops or on demand. Since no gauge is supplied, the set pressure cannot be read without adding one to the 1/8in connection. If the downstream line must remain oil-free, select a filter-regulator instead of this combination, and note that replacement spares follow the GAF200-08, GAR200-08 and GAL200-08 part numbers. Because the lower pressure type tops out at 0.4 MPa, it provides only 44% of the standard 0.9 MPa ceiling.
Quick checklist
- ✓ Body size for your peak flow (1/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C08LNK FAQ
This lower-pressure unit operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 25 cc drain bowl, a 36 cc oil bowl, a 40 um element, and weighs 750 g. The operating temperature is -5 to 70 C, and the recommended lubricant is ISO VG 32.
The N in the ordering code indicates no gauge is supplied. The body has a 1/8in gauge connection, so a separate instrument reading MPa/psi for the default PT thread can be added if you need to monitor the 0.15-0.4 MPa set pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C08LNK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.