
The AirTAC GAC F.R.L. Unit GAC200C08SWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Supplying clean, regulated and lubricated air to a single actuator, the AirTAC GAC200C08SWT integrates a filter, regulator and lubricator on one L-shape bracket with quick clamps. This compact 750 g assembly features a 1/4in port, a 5 um element for fine particle capture, and a metal bowl. The standard type regulates pressure from 0.15-0.9 MPa (20-130 psi).
Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. A circular gauge is fitted, reading MPa/psi for the default NPT thread. Condensate is managed by a semi-auto drain that dumps on each pressure drop, paired with a manual drain for on-demand emptying.
| Model | Airtac GAC F.R.L. Unit GAC200C08SWT |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds instrument air to sensitive directional valves on a small jig, using the 5 um element to prevent particulate contamination.
Conditions air for a single pneumatic actuator on a light-duty assembly fixture, delivering stable 0.15-0.9 MPa pressure.
Fits into tight machine frames where space is limited, providing all-in-one filtration, regulation and lubrication at 750 g.
This 1/4in unit is the smallest body in the GAC range, making it ideal for tight installations where a 750 g assembly mounts neatly to a panel or frame rather than relying on tubing support. The 5 um W element traps far finer particles than the 40 um standard, suiting precision valves, though it requires more frequent element service. The metal bowl provides a robust housing choice for harsher environments, operating within the standard -5 to 70 C range. If your downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. For maintenance, the three units are separately orderable as GAF200-08, GAR200-08 and GAL200-08. Stepping up to the GAC300 roughly doubles the flow envelope, moving from 1750 L/min to 3000 L/min at 0.7 MPa inlet, but the GAC200 remains the most compact option. Since max supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out.
AirtacDistr lists every GAC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gac200-08-three-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type F.R.L. combination operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It has a 1/4in port, a 5 um element, and a metal bowl. The temperature range is -5 to 70 C, the drain bowl is 25 cc, the oil bowl is 36 cc, and the unit weighs 750 g. Use ISO VG 32 or equivalent lubricant.
The W code specifies a 5 um element, which traps far finer particles than the 40 um standard for precision instrumentation, at the cost of more frequent element service. The drain position is blank, meaning it ships with both a semi-auto drain that dumps condensate on each pressure drop and a manual drain for on-demand emptying.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.