
The AirTAC GAC F.R.L. Unit GAC200N08ALT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for light-duty pneumatics, this GAC200 unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port serves smaller actuators, and the lower-pressure type restricts the operating band to 0.15-0.4 MPa (20-58 psi). A 40 um element captures particulates before the regulator, ensuring the internal seat stays clean.
Because the lubricator sits last in the sequence, oil mist enters the airstream downstream of the pressure control so it never fouls the spring mechanism. The nylon bowl equips this assembly with an automatic drain that evacuates the 25 cc condensate sump without an operator. A circular gauge is fitted, reading MPa/psi for the default NPT thread, allowing direct visual confirmation of the low setpoint. Order code GAC200N08ALT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200N08ALT |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure cylinders gripping delicate electronics during PCB routing and populating tasks.
Conditions air for sensitive benchtop fluid dispensers requiring stable, sub-0.4 MPa actuation.
Powers single small-bore valves on desktop pick-and-place units without over-pressurizing the seals.
Choose this assembly for single-station machines needing low outlet pressures, noting the 0.15-0.4 MPa (20-58 psi) ceiling limits it to specific low-force cylinders. If a line must stay completely free of oil, omit the lubricator and select a filter-regulator instead. The automatic drain suits unattended or humid environments where manual bowl emptying is impractical. For maintenance, the three units are separately orderable as GAF200-08, GAR200-08 and GAL200-08, meaning a clogged element does not require replacing the whole assembly. Stepping up to the GAC300 increases the plotted flow envelope from 1750 to 3000 L/min at 0.7 MPa inlet, roughly a 71% increase in capacity. By choosing the L type, the 0.4 MPa upper limit is 44% of the Standard type's 0.9 MPa ceiling.
AirtacDistr lists every GAC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gac200-08-three-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 25 cc drain bowl, a 36 cc oil bowl, a 40 um element, and weighs 750 g. The recommended lubricant is ISO VG 32.
The automatic drain clears condensate from the 25 cc sump whenever pressure drops, removing the need for manual intervention. This is particularly useful for lightly loaded machines that might run unattended for long cycles.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.