verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC200 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC200N08ALWT

The AirTAC GAC F.R.L. Unit GAC200N08ALWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size1/4"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialNylon
  • Drainautomatic
  • Pressure gaugeCircular, psi / bar
  • Weight750 g
$83.10 $90.60Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC200-08 bowl, type and element option on one page All GAC200-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC200N08ALWT

Delivering cleaned, regulated and lubricated air for compact pneumatics, this AirTAC unit integrates a filter, regulator and lubricator on a single L-shape bracket. It features a 1/4in port, a 5 um element for fine particle capture, and a nylon bowl. The lower-pressure type restricts the operating range to 0.15-0.4 MPa (20-58 psi).

Air passes through the filter first, then the regulator, before oil mist is introduced by the lubricator downstream of the regulator seat. The automatic drain clears condensate from the 25 cc bowl without operator intervention, while the fitted circular gauge reads MPa/psi for the default NPT thread. Weighing 750 g, this assembly suits light-duty installations where space is tight. Order code GAC200N08ALWT has NPT ports (the T in the code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC200N08ALWT Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC200N08ALWT
SeriesGAC200 F.R.L. combination
Port size1/4" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialNylon
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl25 cc
Capacity of oil bowl36 cc
Recommended lubricantISO VG 32 or equivalent
Weight750 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.

Model Code: Airtac GAC F.R.L. Unit GAC200N08ALWT

GAC200GA200 series F.R.L. unit — sets ports, bowl capacity and weight.
NBowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N).
08Port size 1/4". This body offers 06 = 1/8", 08 = 1/4".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC200 · 1/4" · curve to 1750 L/min
One size upGAC300 (curve to 3000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC200N08ALWT Is Used

precision_manufacturing

Micro-Assembly Jigs

Feeds low-pressure cylinders handling delicate electronics where a 5 um element protects tiny precision valves from grit.

science

Laboratory Pneumatics

Conditions air for benchtop analytical instruments requiring stable 0.4 MPa supply and automatic condensate removal.

straighten

Textile Guiding

Regulates sensitive air bearings on yarn guides, using the nylon bowl to avoid shatter hazards near moving threads.

Is the Airtac GAC F.R.L. Unit GAC200N08ALWT the Right Air-Prep Unit?

Choose this assembly for single actuators or small jigs requiring precise low-pressure control and fine 5 um filtration. The 5 um element traps far finer particles than the standard 40 um grade, ideal for sensitive instrument air, though it requires more frequent element service. Because the lubricator adds oil mist downstream, select a separate filter-regulator if your line must remain strictly oil-free. Should a component fail, order the GAF200-08 filter, GAR200-08 regulator and GAL200-08 lubricator individually instead of replacing the whole bracket. Stepping up to the GAC300 body increases the plotted flow envelope from 1750 L/min to 3000 L/min at 0.7 MPa inlet, a 1.7x jump in capacity. Finally, note that the 0.4 MPa upper limit is 44% of the Standard type's 0.9 MPa ceiling, so verify your machine will never need more pressure.

AirtacDistr lists every GAC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gac200-08-three-unit-frl

Quick checklist

  • ✓ Body size for your peak flow (1/4" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 25 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 750 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC200N08ALWT FAQ

This lower-pressure unit operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It has a 1/4in port, a 5 um element, a 25 cc drain bowl and a 36 cc oil bowl. The temperature range is -5 to 70 C, the recommended lubricant is ISO VG 32, and it weighs 750 g.

The automatic drain clears accumulated water from the 25 cc bowl on its own, which is decisive for unattended or wet lines. The lower-pressure type caps the regulating range at 0.4 MPa; if your machine might ever require more, this is the wrong part, as the L type cannot reach the 0.9 MPa standard ceiling.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC200N08ALWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.