
The AirTAC GAC F.R.L. Unit GAC200N08ALWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for light-duty pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. It features a 1/4in port, a 5 um element and a lower pressure range of 0.15-0.4 MPa (20-58 psi). The nylon bowl houses an automatic drain, while a fitted circular gauge reads in MPa/psi for the default NPT thread.
Air passes through the filter first, then the regulator, before oil mist is added downstream by the lubricator so the regulator seat never gets fouled. Because this is a 750 g assembly, it needs a proper panel mount rather than tubing support. The reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue. Order code GAC200N08ALWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200N08ALWTK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive solenoid valves requiring low 0.4 MPa operating pressure and 5 um filtration to prevent spool sticking.
Conditions air for small pneumatic grippers on test benches, utilizing the 25 cc drain bowl for light condensate loads.
Supplies oil-misted air to single-acting cylinders in assembly tools, with the automatic drain handling intermittent moisture.
Choose this assembly for low-pressure circuits needing fine filtration, but remember the L type tops out at 0.4 MPa, so select a standard type if the machine might ever need more. The 5 um element traps far finer particles than the 40 um default, suiting precision valves, though it requires more frequent service. The automatic drain clears condensate without an operator, which is decisive for unattended lines. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. Spares are GAF200-08, GAR200-08 and GAL200-08. Stepping up to the GAC300 body shifts the plotted flow envelope from 1750 to 3000 L/min at 0.7 MPa inlet, an increase of roughly 1.7x.
AirtacDistr lists every GAC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gac200-08-three-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
It operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It has a 25 cc drain bowl, a 36 cc oil bowl, uses ISO VG 32 lubricant, and weighs 750 g.
The K indicates that a reverse-flow (reflux) valve is attached. The catalogue displays this as a distinct pneumatic symbol on its own page, and the specific operational details should be confirmed from that datasheet.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.