Airtac GAC F.R.L. Unit GAC200N08ASN
The AirTAC Airtac GAC F.R.L. Unit GAC200N08ASN is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/4"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200N08ASN
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC GAC200N08ASN unit integrates a filter, regulator and lubricator on a single L-shape bracket. It features a 1/4in port, a 40 um element and a standard pressure range of 0.15-0.9 MPa (20-130 psi). The nylon bowl provides a clear view of the fluid levels while keeping the total mass at just 750 g.
Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the internal mechanisms. This specific model includes an automatic drain that clears condensate without an operator, and it ships without a gauge; the 1/8in gauge connection allows a pressure indicator to be added later if needed. Spares follow the body-port suffix, meaning GAF200-08, GAR200-08 and GAL200-08 are ordered individually when required.
Airtac GAC F.R.L. Unit GAC200N08ASN Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200N08ASN |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC200N08ASN
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200N08ASN Is Used
Small Pneumatic Jigs
Feeds single-actuator jigs and small clamping fixtures where a compact 750 g assembly is required.
Benchtop Tooling
Conditions air for light benchtop grinders or drills, adding necessary oil mist for moving vanes.
Lab Automation
Supports laboratory pick-and-place arms by providing stable 0.15-0.9 MPa pressure with auto draining.
Is the Airtac GAC F.R.L. Unit GAC200N08ASN the Right Air-Prep Unit?
Choose this 1/4in port body for light-duty tasks, stepping up to the GAC300 if your duty point requires the 3000 L/min plotted flow envelope rather than the 1750 L/min curve provided here at 0.7 MPa inlet. The nylon bowl material is specified by the N before the port, while the N after the port means no gauge is supplied, leaving the set pressure unreadable until one is fitted to the 1/8in connection. An automatic drain clears the 25 cc condensate bowl without manual intervention, and the 40 um element suits general plant air. If the downstream line must stay oil-free, select a filter-regulator instead of this combination. Remember that max supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, so there is only about 0.1 MPa of headroom above the top setting.
Quick checklist
- ✓ Body size for your peak flow (1/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200N08ASN FAQ
It operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It has a 25 cc drain bowl, a 36 cc oil bowl, uses ISO VG 32 lubricant, and weighs 750 g.
The N after the port code indicates no gauge is supplied. You can install one using the 1/8in gauge connection, which lets you choose a specific dial scale to match your operator preferences.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200N08ASN
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.