
The AirTAC GAC F.R.L. Unit GAC200N08AST is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for compact pneumatics, this AirTAC assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port serves the 200 body size, operating from 0.15-0.9 MPa (20-130 psi) with a 40 um element. A nylon bowl equips the unit, and the automatic drain clears condensate without an operator.
Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The assembly weighs 750 g, making it light enough for panel mounting without relying on tubing for support. A circular gauge is fitted, reading MPa/psi for the default NPT thread. Order code GAC200N08AST has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200N08AST |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds single actuators on light assembly jigs where floor space is tight and a 1/4in port is sufficient.
Conditions air for small pneumatic clamps on test fixtures, relying on the automatic drain for unattended weekend runs.
Supplies oil mist to small gripper cylinders on electronic component handling lines, protecting moving seals from wear.
This 200 body unit carries a 25 cc condensate bowl and a 36 cc oil bowl, dictating a frequent maintenance schedule compared to larger frames. The automatic drain is decisive for unattended or wet lines, emptying the 25 cc sump on its own. If a machine requires completely oil-free downstream air, the lubricator must be omitted and a separate filter-regulator chosen instead. The three constituent parts are separately orderable as GAF200-08, GAR200-08 and GAL200-08, meaning a clogged element does not require replacing the whole assembly. Stepping up to the GAC300 roughly doubles the flow envelope to 3000 L/min at 0.7 MPa inlet, but for this compact body the catalogue curve is plotted to 1750 L/min. Keep in mind the maximum supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, leaving only about 0.1 MPa of headroom above the top setting.
AirtacDistr lists every GAC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gac200-08-three-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
The standard pressure range is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 750 g, has a 25 cc drain bowl, a 36 cc oil bowl, and uses ISO VG 32 lubricant.
The N positioned before the 08 port code designates a nylon bowl material. The common specifications of 1.0 MPa max pressure and -5 to 70 C remain identical to the PC and metal bowl options, so the choice is a build or environment consideration rather than a pressure upgrade.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.