verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC200 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC200N08ASWT

The AirTAC GAC F.R.L. Unit GAC200N08ASWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination
  • Port size1/4"
  • Pressure range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade5 µm
  • Bowl materialNylon
  • Drainautomatic
  • Pressure gaugeCircular, psi / bar
  • Weight750 g
$83.10 $90.60Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC200-08 bowl, type and element option on one page All GAC200-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC200N08ASWT

Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC F.R.L. combination pre-assembles a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. This specific GAC200N08ASWT variant features a 1/4in port, a standard pressure range of 0.15-0.9 MPa (20-130 psi), and a 5 um element for trapping finer particles. Because the air passes through the filter before reaching the regulator, the internal seat remains shielded from raw line debris.

The unit carries a 25 cc condensate bowl and a 36 cc oil reservoir, requiring frequent attention compared to larger frames, but its 750 g mass makes it ideal for tight panels where a unit must hang from a manifold rather than a dedicated frame. An automatic drain clears the accumulated water without an operator, while the fitted circular gauge reads in MPa/psi for the default NPT thread. If the downstream process demands strictly dry, unlubricated air, omit the lubricator and choose a dedicated filter-regulator instead.

Airtac GAC F.R.L. Unit GAC200N08ASWT Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC200N08ASWT
SeriesGAC200 F.R.L. combination
Port size1/4" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.9 MPa (20 - 130 psi)
TypeStandard
Bowl materialNylon
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl25 cc
Capacity of oil bowl36 cc
Recommended lubricantISO VG 32 or equivalent
Weight750 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.

Model Code: Airtac GAC F.R.L. Unit GAC200N08ASWT

GAC200GA200 series F.R.L. unit — sets ports, bowl capacity and weight.
NBowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N).
08Port size 1/4". This body offers 06 = 1/8", 08 = 1/4".
ADrain: Automatic drain.
SStandard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC200 · 1/4" · curve to 1750 L/min
One size upGAC300 (curve to 3000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC200N08ASWT Is Used

precision_manufacturing

Precision Valve Manifolds

Feeds clean, oil-misted air to sensitive solenoid valve banks where the 5 um element protects tight internal tolerances from scoring.

handyman

Benchtop Assembly Jigs

Conditions air for light-duty pneumatic pick-and-place tools on a workbench, benefiting from the 750 g lightweight frame for manifold mounting.

science

Laboratory Automation

Regulates pressure for compact actuator setups in lab equipment, utilizing the automatic drain to handle condensate without manual intervention.

Is the Airtac GAC F.R.L. Unit GAC200N08ASWT the Right Air-Prep Unit?

Choose this compact 1/4in body when feeding a single actuator or a small jig, stepping up to the GAC300 if you need a 3/8in port and a larger 60 cc drain bowl that doubles the service interval. The 5 um W element here catches far finer grit than the standard 40 um grade, making it well-suited for precision valves, though it will clog faster in dirty lines. The nylon bowl keeps the assembly light, and the fitted gauge lets technicians verify the set pressure directly. For maintenance, the individual components are separately orderable as GAF200-08, GAR200-08 and GAL200-08. Stepping up from this body, the GAC300 flow envelope is plotted to 3000 L/min at 0.7 MPa inlet, roughly 1.7x the 1750 L/min envelope of the GAC200.

AirtacDistr lists every GAC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gac200-08-three-unit-frl

Quick checklist

  • ✓ Body size for your peak flow (1/4" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 25 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 750 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC200N08ASWT FAQ

This model operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the drain bowl holds 25 cc, the oil bowl holds 36 cc, the unit weighs 750 g, and the recommended lubricant is ISO VG 32.

The W code in the model string designates a 5 um filtering grade rather than the default 40 um. This finer element captures microscopic solid particles, making it necessary for protecting delicate instrument air circuits or precision valves, though it will require more frequent replacement in dusty environments.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC200N08ASWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.