
The AirTAC GAC F.R.L. Unit GAC200N08SNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC GAC200N08SNWTK F.R.L. combination pre-assembles a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port serves the compact 750 g body, while the 5 um element captures fine particles for sensitive instrumentation. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat to prevent fouling.
This specific configuration uses a nylon bowl and omits the pressure gauge, leaving a 1/8in connection for adding one later. The standard type regulates from 0.15-0.9 MPa (20-130 psi), and the reverse-flow valve is fitted as an ordering option. A semi-auto and manual drain pair is installed to clear the 25 cc condensate bowl. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200N08SNWTK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds small pneumatic grippers on electronics pick-and-place machines where the 5 um element protects tiny precision valves from particulate fouling.
Conditions air for single-cylinder test fixtures, utilizing the compact 750 g body to fit neatly inside tight bench enclosures.
Supplies oil-misted air to small pneumatic stretchers and tensioners, ensuring continuous lubrication for high-speed moving parts.
Choose this 1/4in unit for single actuators or small jigs where the 5 um element protects precision valves. The nylon bowl suits standard -5 to 70 C environments, but buyers should confirm compatibility with aggressive solvents. Since no gauge is supplied, the set pressure cannot be read without adding one to the 1/8in port. If the downstream line must remain oil-free, select a filter-regulator instead of this combination. Replacement spares follow the body-port suffix: GAF200-08, GAR200-08 and GAL200-08. Stepping up to the GAC300 body shifts the plotted flow envelope from 1750 to 3000 L/min at 0.7 MPa inlet, an increase of roughly 1.7x for higher demand.
AirtacDistr lists every GAC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gac200-08-three-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This model operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 25 cc drain bowl, a 36 cc oil bowl, a 5 um element, and weighs 750 g. The recommended lubricant is ISO VG 32.
The N in the ordering code indicates no gauge is supplied, meaning the set pressure cannot be read unless a separate gauge is added to the 1/8in connection. Additionally, the K code means a reverse-flow valve is fitted, which the catalogue shows as a separate pneumatic symbol with details on its own page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.