Airtac GAC F.R.L. Unit GAC200N08SWK
The AirTAC Airtac GAC F.R.L. Unit GAC200N08SWK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/4"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200N08SWK
Delivering cleaned, pressure-set and oil-misted air for downstream pneumatics, the AirTAC GAC200N08SWK integrates a filter, regulator and lubricator on a single L-shape bracket. This assembly uses a 1/4in port and a 5 um element to trap fine particles, while the standard type regulates pressure from 0.15-0.9 MPa (20-130 psi). Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the internal valving.
Weighing 750 g, this compact unit carries a 25 cc condensate bowl and a 36 cc oil reservoir, making it suitable for single actuators or small jigs. The nylon bowl and PT thread are fitted with a circular gauge reading MPa/psi, and a reverse-flow (reflux) valve is included as a distinct pneumatic symbol. The 5 um filtration grade demands more frequent element service than the 40 um default, trading maintenance time for stricter air purity.
Airtac GAC F.R.L. Unit GAC200N08SWK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200N08SWK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAC F.R.L. Unit GAC200N08SWK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200N08SWK Is Used
Micro-Actuator Jigs
Feeds single small-bore cylinders in assembly jigs where a 5 um element protects precision sliding parts from grit.
Lab Pneumatic Panels
Conditions air for benchtop test rigs, using the 1/4in port and nylon bowl to keep instrumentation supplied with stable pressure.
Air Tool Workstations
Supplies individual pneumatic screwdrivers or small grinders, adding the necessary oil mist downstream of the regulator.
Is the Airtac GAC F.R.L. Unit GAC200N08SWK the Right Air-Prep Unit?
Choose this 1/4in port model for light-duty tasks, stepping up to the GAC300 if your line needs the 3000 L/min plotted flow envelope rather than the 1750 L/min curve provided here at 0.7 MPa inlet. The nylon bowl keeps the mass at 750 g, while the semi-auto and manual drain pairing gives dual condensate management options. If the downstream line must remain oil-free, omit the lubricator and select a filter-regulator instead. The fitted gauge reads in MPa/psi for the default PT thread, and replacement spares follow the GAF200-08, GAR200-08 and GAL200-08 codes. With a 1.0 MPa maximum supply and a 0.9 MPa standard ceiling, there is only about 0.1 MPa of regulation headroom, so plan an inlet pressure near the maximum if you truly need the highest outlet setting.
Quick checklist
- ✓ Body size for your peak flow (1/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200N08SWK FAQ
This model operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the drain bowl holds 25 cc, the oil bowl holds 36 cc, the unit weighs 750 g, and the recommended lubricant is ISO VG 32.
The W indicates a 5 um filtering element, which catches finer particles than the standard 40 um grade but requires more frequent element changes. The K signifies that a reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200N08SWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.