
The AirTAC GAC F.R.L. Unit GAC300C08LT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC300C08LT combines a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 1/4in port pairs with a 40 um element, while the lower-pressure type restricts the operating range to 0.15-0.4 MPa (20-58 psi). A circular gauge is fitted, reading MPa/psi for the default NPT thread.
Air passes through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The metal bowl equips this unit for harsher environments, and the 60 cc drain bowl paired with a 98 cc oil reservoir dictates the maintenance interval. At 1300 g, it needs a solid panel mount rather than tubing support.
| Model | Airtac GAC F.R.L. Unit GAC300C08LT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds delicate pneumatic grippers and small-bore cylinders on electronics assembly lines where operating pressures must stay below 0.4 MPa to prevent component damage.
Conditions air for low-pressure actuators driving film pullers and sealing bars in vertical packaging equipment, ensuring smooth motion via added oil mist.
Prepares supply air for sensitive fluid dispensing valves and pneumatic slides on benchtop scientific instruments requiring stable, low-pressure regulation.
Choose this specific configuration when your machinery operates strictly below 0.4 MPa and requires a robust metal bowl. It carries a semi-auto and manual drain pair, meaning the semi-auto dumps condensate on each pressure drop while the manual option allows on-demand emptying. If your downstream line must remain completely oil-free, omit the lubricator and select a standalone filter-regulator instead. For maintenance, the individual elements and bowls are separately orderable as GAF300-08, GAR300-08 and GAL300-08. Stepping up to the GAC400 body roughly doubles the plotted flow envelope to 6000 L/min at 0.7 MPa inlet compared to this unit's 3000 L/min. By choosing this L type, the pressure ceiling is 44% of the Standard type's 0.9 MPa maximum.
AirtacDistr lists every GAC300-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gac300-08-three-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This unit operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 1/4in port, a 40 um element, a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g. The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32.
The C in the model code denotes a metal bowl, offering durability in demanding environments compared to standard PC or nylon options. The L indicates a lower-pressure type, meaning the regulating range maxes out at 0.4 MPa; if your machine may ever require a higher setting, this is the wrong part, as standard types regulate up to 0.9 MPa.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.