
The AirTAC GAC F.R.L. Unit GAC300C08LWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC300C08LWT unit combines a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 1/4in port pairs with a 5 um element to trap fine particles before they reach precision valves, while the metal bowl equips the assembly for rugged industrial environments. A circular gauge is fitted, reading MPa/psi for the default NPT thread.
This lower-pressure type regulates between 0.15-0.4 MPa (20-58 psi), making it suitable for low-force actuator circuits. The build order is strict: air passes through the filter first, then the regulator sets the pressure, and the lubricator adds oil mist last so the internal regulator seat never fouls. The 60 cc condensate bowl and 98 cc oil reservoir dictate the maintenance rhythm, and the semi-auto plus manual drain pair clears water on every pressure drop or on demand.
| Model | Airtac GAC F.R.L. Unit GAC300C08LWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds clean, finely filtered 5 um air to low-pressure proportional valves in textile or inspection machinery where standard 40 um filtration is too coarse.
Regulates down to the 0.15-0.4 MPa range for delicate gripping tasks on electronic assembly lines, preventing crush damage to fragile components.
The metal bowl withstands the swarf and solvent splash typical of machining cells, supplying steady lubricated air to pneumatic clamps.
Choose this metal-bowl configuration for harsher settings where PC or nylon might not survive, keeping in mind the common -5 to 70 C temperature limits apply across all materials. The 5 um element provides finer filtration than the 40 um standard, ideal for protecting sensitive instrument air, though it requires more frequent element changes. Because the lubricator introduces oil mist downstream, select a separate filter-regulator if your line must remain strictly oil-free. Should a component fail, the assembly breaks down into independently orderable spares: GAF300-08, GAR300-08 and GAL300-08.
When sizing, note the catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, which is 50% of the GAC400's 6000 L/min envelope. Crucially, the L type tops out at 0.4 MPa, which is 44% of the Standard type's 0.9 MPa ceiling.
AirtacDistr lists every GAC300-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gac300-08-three-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 1/4in port, a 5 um element, a metal bowl, a 60 cc drain capacity, a 98 cc oil bowl capacity, and weighs 1300 g. The recommended lubricant is ISO VG 32.
The L denotes the lower-pressure type, restricting the regulating range to 0.15-0.4 MPa (20-58 psi). If your machine may ever require a higher outlet pressure, this is the wrong part, as the internal spring is optimized solely for this lower ceiling.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.