
The AirTAC GAC F.R.L. Unit GAC300C08SWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this AirTAC GAC300C08SWT combines a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 1/4in port serves a 1300 g assembly that conditions air at 0.15-0.9 MPa (20-130 psi). A 5 um element traps fine particles for precision valves, while the metal bowl equips the unit for rugged industrial environments.
Air flows through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The unit carries a 60 cc condensate bowl and a 98 cc oil reservoir. A circular gauge is fitted, reading MPa/psi for the default NPT thread, allowing operators to monitor the set pressure directly at the unit.
| Model | Airtac GAC F.R.L. Unit GAC300C08SWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds precision valves on CNC tool changers where the 5 um element prevents scoring of sensitive internal spools.
Conditions air for pneumatic sealing jaws on form-fill-seal packaging lines, ensuring consistent actuator speed.
Supplies lubricated air to sheet metal press brake feeding arms, extending cylinder life through continuous oil mist.
Choose this 1/4in port model for mid-size duties where a 5 um element protects sensitive instruments and a metal bowl withstands shop floor impacts. The semi-auto and manual drain pair is fitted, dumping condensate on pressure drops or on demand. If your line must stay completely oil-free, omit the lubricator and choose a filter-regulator instead. Spares are ordered separately as GAF300-08, GAR300-08 and GAL300-08, all sharing the same body and port.
Stepping up to the GAC400 body increases the condensate bowl to 100 cc and the plotted flow envelope to 6000 L/min at 0.7 MPa inlet, compared to this unit's 60 cc bowl and 3000 L/min curve. Because the maximum supply is 1.0 MPa and the standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out.
AirtacDistr lists every GAC300-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gac300-08-three-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
The standard pressure range is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C. The drain bowl holds 60 cc and the oil bowl 98 cc. The unit weighs 1300 g and uses ISO VG 32 lubricant.
The 5 um element traps far finer particles than the standard 40 um filter, making it ideal for instrument air or precision valves, though it requires more frequent element service. The metal bowl offers a durable build for industrial settings without the impact risk of plastic.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.