
The AirTAC GC600-20 FRL Unit (GC60020AF2T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC60020AF2T is a three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator that together clean, regulate and oil-mist lubricate compressed air. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Maximum working pressure is 1.0 MPa (145 psi), operating temperature is -5 to 70 C (non-freezing), and with the automatic drain the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi). The 600-size bowls are aluminium alloy.
This is a genuine AirTAC part from the G series, which runs from size 200 to 600 with options for ports, threads, drains, filter grades and gauge scales. Published flow appears only as curves rather than a single rating, so we confirm flow and datasheet figures on request before you order.
| Model | AirTAC GC600-20 FRL Unit (GC60020AF2T) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Feeds regulated and lubricated air to the dock-leveler lift cylinders and wheel-lock clamps at a loading bay, sized on a 3/4 in branch off the plant main.
Conditions supply to the air cylinders that divert, stop and lane-split bottles on a bottling conveyor, with the psi gauge read directly by the line's US-standard instrumentation.
Serves a multi-outlet maintenance shop header powering impact tools, air chisels and test rigs, where the 40 um element handles general shop air and the lubricator protects the tools.
Step up to size 600 with the 3/4 in port when the branch flow exceeds what a 400-size F.R.L. carries; step down to 300 or 400 for lighter demand. This code keeps the 40 um standard element, the right choice for general plant air, and orders the psi-scaled square gauge (F2) instead of MPa or bar readouts. The automatic drain removes condensate without operator attention, suiting unmanned compressor rooms and overhead drops. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Since flow is published as curves, not a single rated number, ask us to confirm sizing against your application before ordering.
AirtacDistr lists every GC600-20 order code with its price on one page at https://airtacdistr.com/products/airtac-gc600-20-three-unit-frl
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
No single rated figure exists to quote: AirTAC publishes flow for this series as curves. Share your expected flow and operating pressure and we will confirm the correct size against the datasheet curves on request before you order.
The F2 code selects the embedded square gauge scaled in psi; F1 and F3 versions of the same 600-20 unit read in MPa and bar. With no W in the code, the filter element is the 40 um standard; add W to the code to order the optional 5 um element for finer filtration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.