
The AirTAC GC60025F2WT F.R.L. Combination NPT1in 5um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC600 is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled into one conditioning station for compressed air. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. At size 600 the filter and lubricator bowls are aluminium alloy, and the unit is rated to 1.0 MPa (145 psi) inlet and -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, filter grades of 40 um standard or 5 um (W), automatic, manual or differential-pressure drains, and MPa, psi or bar gauge scales. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and datasheet figures for your application. Order code GC60025F2WT has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GC60025F2WT F.R.L. Combination NPT1in 5um |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Filtered, regulated and lubricated air for pneumatic grippers and weld-clamp actuators on a 1 in main drop feeding a robot weld cell.
Conditioned air for conveyor diverters and bottle-sorting cylinders on the plant air main at the filler infeed.
Clean, regulated and lubricated air for workpiece clamps and tool-change cylinders fed from a central compressor-room header.
Step through sizes 200/300/400/600 to match the port and flow your line needs; This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Choose the drain - differential-pressure as fitted here, or automatic or manual; choose the element - 40 um standard or 5 um, and this unit carries the W code for 5 um; pick the gauge scale MPa, psi or bar, and this one reads psi on the embedded square gauge. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
AirtacDistr lists every GC600-25 order code with its price on one page at https://airtacdistr.com/products/airtac-gc600-25-three-unit-frl
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure and expected air demand and we will confirm sizing from the datasheet on request.
The W code in GC60025F2WT means a 5 um element instead of the 40 um standard, suited to finer particulate removal upstream of valves and cylinders. The differential-pressure drain (the default) discharges condensate as pressure drop builds; automatic and manual drains are available if you prefer.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.