verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC300 · F.R.L. Combination (filter + regulator + lubricator)

GC30010AC2TK AirTAC F.R.L. Combination, NPT3/8

The AirTAC GC30010AC2TK AirTAC F.R.L. Combination, NPT3/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT3/8"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade40 µm
  • DrainAutomatic drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$136.04 $143.54Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC300-10 drain, gauge and thread option on one page All GC300-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the GC30010AC2TK AirTAC F.R.L. Combination, NPT3/8

The GC30010AC2TK is a genuine AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one complete air-treatment set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. A reverse/check valve is fitted, and the set includes a mounting bracket. It filters water and particulate from the compressed air, regulates downstream pressure, and adds oil mist to lubricate downstream pneumatic components.

This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, and options including manual or differential-pressure drains, a 5 um filter element (code W), gauge scale in MPa, psi or bar, and G (BSPP) or NPT threads as order options. Flow is published as curves rather than a single rated figure, so we confirm datasheet and sizing figures on request.

GC30010AC2TK AirTAC F.R.L. Combination, NPT3/8 Technical Specifications

ModelGC30010AC2TK AirTAC F.R.L. Combination, NPT3/8
SeriesGC300 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT3/8" (NPT thread)
Filtering grade40 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeAutomatic drain
Bowl materialPC
Pressure gaugeFitted — round, psi scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: GC30010AC2TK AirTAC F.R.L. Combination, NPT3/8

GC300G-series F.R.L. combination, 300 body — sets the port range.
10Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
ADrain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
CGauge shape: Round. C is round, F is square.
2Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-10 filter, GR300-10 regulator and GL300-10 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC300 · PT3/8" · 40 µm
One size downGC200
One size upGC400
Two-unit equivalentGFC300-10
Build orderFilter → regulator → lubricator

Where the GC30010AC2TK AirTAC F.R.L. Combination, NPT3/8 Is Used

factory

Plant air drop for assembly lines

Installed at the air drop point feeding an assembly-line station, the set cleans water and particulate from the shop air, holds a steady regulated pressure for the actuators on the line, and oils the cylinders and valves so they keep running shift after shift.

precision_manufacturing

CNC machine pneumatic circuits

Mounted on the supply line to a CNC machining centre's pneumatic circuit, it removes condensate before it reaches the tool-change cylinder, regulates the clamping pressure, and lubricates the air components that cycle thousands of times per shift.

conveyor_belt

Packaging and conveyor actuation

Fitted ahead of the pneumatic drives on a packaging or conveyor line, it dries and filters the supply, keeps the regulator set so diverters and pushers move consistently, and delivers oil mist to extend the life of the line's air cylinders.

Is the GC30010AC2TK AirTAC F.R.L. Combination, NPT3/8 the Right Station?

Start with the size and port: this unit is size 300 with a NPT3/8 port; larger sizes (400, 600) carry larger ports and higher flow capacity, so step up if your downstream air demand is high. Drain type matters: this unit has an automatic drain (code A), which discharges condensate on its own - choose manual drain only where someone can attend the bowl regularly. The standard filter grade here is 40 um; specify the 5 um element (code W) if downstream equipment needs finer filtration. The gauge is round with a psi scale; MPa or bar scales are available. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. A mounting bracket is included. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.

AirtacDistr lists every GC300-10 order code with its price on one page at https://airtacdistr.com/products/airtac-gc300-10-three-unit-frl

Quick checklist

  • ✓ Body size for your peak flow (PT3/8" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-10 regulator with a GF300-10 filter on that branch.

GC30010AC2TK AirTAC F.R.L. Combination, NPT3/8 FAQ

AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your application and operating pressure and we will confirm the flow and sizing figures from the datasheet on request before you order.

The A in the code means the filter bowl has an automatic drain, which discharges collected condensate without anyone having to open it - the right choice for unattended or hard-to-reach installations. The GC series is also available with a manual drain or the differential-pressure (default) drain, so you can order the variant that suits your maintenance routine.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for GC30010AC2TK AirTAC F.R.L. Combination, NPT3/8

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.