
The AirTAC GC30015F2WT AirTAC F.R.L. Combination, NPT1/2 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC30015F2WT is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package for compressed air. This configuration is size 300 with a NPT1/2 (1/2 in) port, NPT thread. The filter element is the 5 um grade (code W) for finer water and particulate removal than the 40 um standard, the bowl drains by the differential-pressure method, and the regulator is the standard type with a fitted embedded square gauge reading in psi. The polycarbonate bowls suit this size, and a mounting bracket is included.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, drain type, filter grade, gauge scale and thread (NPT on this code) selectable per code. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and datasheet figures against your application before ordering.
| Model | GC30015F2WT AirTAC F.R.L. Combination, NPT1/2 |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-15 filter, GR300-15 regulator and GL300-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/2" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-15 |
| Build order | Filter → regulator → lubricator |
Filtered, regulated and lubricated air at a paint booth drop: the 5 um element removes water and particulate ahead of spray equipment, the regulator holds a steady setting and the lubricator mists oil for air tools on the line.
A single point of supply for a packaging line's actuated cylinders and air-driven sealers, where the combination keeps moisture and debris out, holds working pressure steady through shift-long cycles and lubricates the actuators.
Feeding clamps, vices and air-powered fixtures on a machining cell: clean, dry, regulated air protects the clamping circuit while the lubricator keeps cylinders and valves moving smoothly over long production runs.
Size and port are the primary choice: step up from 200 through 300, 400 and 600 as your line flow demand grows - this unit is size 300 with a 1/2 in NPT port. Choose the drain method where the unit is installed: differential-pressure (as fitted here), automatic, or manual for attended points of use. Filter grade is 40 um standard or 5 um (code W, fitted here) where downstream equipment needs finer filtration. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Flow is published as curves, not a single rating, so we cannot quote one number here. Send us your application details and we will confirm sizing against the datasheet before you order.
AirtacDistr lists every GC300-15 order code with its price on one page at https://airtacdistr.com/products/airtac-gc300-15-three-unit-frl
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-15 regulator with a GF300-15 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and required flow, and we will confirm sizing against the datasheet on request before you order.
The W in the code GC30015F2WT selects the optional 5 um grade, which removes finer particulate and water carryover than the 40 um standard element. It is the right choice where downstream valves, cylinders or process equipment are sensitive to contamination; the 40 um element remains the default on other codes in the series.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.