verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC300 · F.R.L. Combination (filter + regulator + lubricator)

GC30015MF2WT AirTAC F.R.L. Combination, NPT1/2

The AirTAC GC30015MF2WT AirTAC F.R.L. Combination, NPT1/2 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT1/2"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade5 µm
  • DrainManual drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$107.41 $114.91Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC300-15 drain, gauge and thread option on one page All GC300-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the GC30015MF2WT AirTAC F.R.L. Combination, NPT1/2

The GC30015MF2WT is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one 300-size set on a NPT1/2 (1/2 in) port. The filter element in this configuration is the fine 5 um grade (W), so it strips water and particulate down to 5 um before the air reaches the regulator, which is the standard type with a 0.05-0.9 MPa (7-130 psi) adjustment range. The drain is manual (M), so the bowl is emptied by hand as part of routine maintenance, and the square gauge fitted here reads in psi. The polycarbonate bowls let you see condensate and oil level at a glance, and the set includes a mounting bracket.

This is a genuine AirTAC part. The GC combination is available in 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, a choice of three thread types (NPT on this code), manual, automatic or differential-pressure drains, 40 um standard or 5 um (W) filter elements, and square or round gauges scaled in MPa, psi or bar. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.

GC30015MF2WT AirTAC F.R.L. Combination, NPT1/2 Technical Specifications

ModelGC30015MF2WT AirTAC F.R.L. Combination, NPT1/2
SeriesGC300 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT1/2" (NPT thread)
Filtering grade5 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialPC
Pressure gaugeFitted — square, psi scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: GC30015MF2WT AirTAC F.R.L. Combination, NPT1/2

GC300G-series F.R.L. combination, 300 body — sets the port range.
15Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
2Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-15 filter, GR300-15 regulator and GL300-15 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC300 · PT1/2" · 5 µm
One size downGC200
One size upGC400
Two-unit equivalentGFC300-15
Build orderFilter → regulator → lubricator

Where the GC30015MF2WT AirTAC F.R.L. Combination, NPT1/2 Is Used

factory

Automotive paint-shop air supply

Feeding spray guns and air-assisted applicators on a paint line, where the 5 um element, regulated pressure and consistent oil misting protect finish quality across the booth.

precision_manufacturing

CNC machine tool pneumatics

Supplying filtered, regulated and lubricated air to tool changers, clamps and chip-clearing cylinders on a machining centre, with the psi gauge giving operators a local pressure readout.

conveyor_belt

Packaging and case-sealing line

Running carton sealers, case erectors and diverters on a packaging conveyor, where the combination keeps actuators supplied with clean, regulated, lubricated air through a 1/2 in main.

Is the GC30015MF2WT AirTAC F.R.L. Combination, NPT1/2 the Right Station?

Size and port set the capacity of the set: this 300-size unit carries a NPT1/2 (1/2 in) port, one step up from the 200 frame, so choose it when your line's flow demand outgrows the smaller frame. Because flow is published as curves and not a single rating, have us check the curve against your application before you order. The 5 um (W) element suits downstream equipment that needs cleaner air than the 40 um standard grade; the manual drain (M) means an operator drains the bowls on a schedule, so pick the automatic or differential-pressure drain codes instead if nobody is on site to do that. The fitted square gauge reads in psi; MPa and bar scales and an external round gauge are the other catalogue options. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

AirtacDistr lists every GC300-15 order code with its price on one page at https://airtacdistr.com/products/airtac-gc300-15-three-unit-frl

Quick checklist

  • ✓ Body size for your peak flow (PT1/2" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-15 regulator with a GF300-15 filter on that branch.

GC30015MF2WT AirTAC F.R.L. Combination, NPT1/2 FAQ

AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a figure here. Tell us your application and we will confirm the flow from the datasheet curves on request before you order.

The M in the code GC30015MF2WT specifies a manual drain, so condensate in the filter bowl is emptied by hand during maintenance. If you prefer the bowl to discharge itself, the same set is available with an automatic (A) or differential-pressure (blank) drain code.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for GC30015MF2WT AirTAC F.R.L. Combination, NPT1/2

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.