
The AirTAC GC40010MF2TK AirTAC F.R.L. Combination, NPT3/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC40010MF2TK is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package for compressed-air lines. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. A reverse/check valve is fitted, and the polycarbonate bowls suit the -5 to 70 C (non-freezing) operating range. Maximum inlet pressure is 1.0 MPa (145 psi).
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600, with port and thread options, drain choices, a 5 um filter option, gauge scale choices and more; full datasheet and flow-curve figures are confirmed on request before you order.
| Model | GC40010MF2TK AirTAC F.R.L. Combination, NPT3/8 |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-10 filter, GR400-10 regulator and GL400-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT3/8" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-10 |
| Build order | Filter → regulator → lubricator |
Filtered, regulated and lubricated air feeding the cylinder circuit of a small pneumatic press or clinching station, with the check valve holding set pressure against backflow.
Conditioned air for the grippers, diverters and pushers along a carton packaging conveyor, where the lubricator keeps actuator seals working shift after shift.
A single point-of-use supply for a CNC machine tool's air-powered clamps and tool-change circuit, with the psi gauge giving operators a local setpoint reference.
Step up or down through the 200/300/400/600 sizes to match the port and the flow your line needs; this 400 size with 3/8 in NPT ports sits mid-range. Choose the drain type for the filter bowl: manual (as here) for attended maintenance, automatic or differential-pressure where drains are not checked daily. Filter grade is 40 um standard; specify the 5 um (W) option when downstream valves or instruments need finer filtration. Gauge scale can be MPa, psi or bar, and the thread can be ordered as three thread types (NPT on this code). Flow for this family is published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering.
AirtacDistr lists every GC400-10 order code with its price on one page at https://airtacdistr.com/products/airtac-gc400-10-three-unit-frl
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-10 regulator with a GF400-10 filter on that branch.
AirTAC publishes flow for this family as performance curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure and air demand and we will confirm the correct size from the datasheet curves on request.
The manual drain (code M) means an operator opens the bowl drain during routine checks. It suits lines that are attended daily. If the unit sits where drains are not checked, the automatic or differential-pressure drain options are the better decode choice.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.