Airtac 3V2M Solenoid Valve 3V2MNCC-15F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNCC-15F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageAC110V
- Electrical entryDIN plug (DIN socket type)
- Stations15
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNCC-15F
Fifteen NC 3/2 valves, one base: the 3V2MNCC-15F is supplied as a complete AC110V assembly with DIN-plug coils, centralised exhaust and PT1/8 threads, ready to drop into a control panel or machine frame. Every valve is a direct-acting, spring-return poppet; outlets vent automatically whenever the coil is off.
Wiring fifteen points becomes one connector exercise, and plumbing becomes one supply run, because the dedicated base carries both. Fifteen coils at 7 VA each add up to 105 VA with all stations energised, inside IP65-protected housings. Flow per station is Cv 0.1. Order the state you need up front: NC and NO are set at the factory and cannot be swapped later.
Airtac 3V2M Solenoid Valve 3V2MNCC-15F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNCC-15F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally closed |
| Item form | Complete assembly — 15 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC110V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNCC-15F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| AC110V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 15F | 15 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNCC-15F Is Used
Palletiser grippers
Spring-return grippers on a palletising head hold boxes only while energised; fifteen NC valves share one air feed and one plug.
Analyser drawer clamping
Sample drawers and sealing jaws in a diagnostic analyser open on spring return, switched by NC valves on a compact manifold.
Mould core pins
Injection tool core pins retract by spring when de-energised, sequenced from a 15-station base with centralised exhaust.
Is the Airtac 3V2M Solenoid Valve 3V2MNCC-15F the Right Part?
Choose this manifold when wiring and plumbing time matters more than per-station flow: each valve is Cv 0.1, lower than the individually ported 3V2 (Cv 0.18 at 1/8 in, 0.19 at 1/4 in, vacuum-rated) and far below the 3V3 at Cv 0.62 (1/4 in, vacuum-rated). Light, low-power duties can use 3V1 bodies at just 3.0 W DC. Double-acting cylinders are out of scope for any 3-port valve - that is a job for the 5-port AirTAC 4V series. Before ordering, fix five things: NC or NO (no conversion afterwards), AC110V coil, DIN plug or flying lead, 15 stations, centralised or independent exhaust, and thread (PT standard, G and NPT to order).
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNCC-15F FAQ
Every station: 3/2 NC poppet valve, Cv 0.1, 0-0.8 MPa operating pressure, -20 to 70 C media temperature, 7 VA AC coil (AC110V here), IP65 housing. Fifteen energised coils draw up to 105 VA. Thread is PT1/8 as standard; G and NPT are catalogue options.
This 15-station assembly uses centralised exhaust: all stations vent through one shared port, which keeps piping short. If a process needs to capture or route each station's spent air separately, order the same valves with D (independent exhaust) in the code instead.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNCC-15F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.