Airtac 3V2M Solenoid Valve 3V2MNCC-16F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNCC-16F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageAC110V
- Electrical entryDIN plug (DIN socket type)
- Stations16
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNCC-16F
The 3V2MNCC-16F is a sixteen-station manifold of NC 3/2 valves: direct-acting, spring-return poppet bodies on a dedicated base, AC110V DIN-plug coils, centralised exhaust, PT1/8 ports. With the coil off, every outlet vents; energising a station feeds its port until the spring returns the poppet.
Sixteen is the practical case for the manifold power budget: 7 VA per AC coil gives 112 VA if the whole bank is energised together, so size the control transformer for that figure. Coils are IP65; flow is Cv 0.1 per station through the base. NC is set at purchase and stays NC - no conversion, gasket reversal or retrofit changes it.
Airtac 3V2M Solenoid Valve 3V2MNCC-16F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNCC-16F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally closed |
| Item form | Complete assembly — 16 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC110V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNCC-16F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| AC110V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 16F | 16 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNCC-16F Is Used
PCB fixture clamping
Electronics test fixtures clamp with single-acting cylinders that release at coil-off, all switched from a 16-station NC manifold.
Sorting gate flippers
Conveyor diverter flippers kick parcels to reject lanes only when energised, so a power loss leaves every gate in the pass position.
Die-cast cooling blow
Cooling air pulses onto die-cast parts from sixteen nozzles driven in groups, sharing one base, one supply and one wiring entry.
Is the Airtac 3V2M Solenoid Valve 3V2MNCC-16F the Right Part?
At sixteen stations, density is the point, and it costs flow: Cv 0.1 per valve versus Cv 0.18 (1/8 in) and 0.19 (1/4 in) for a standalone 3V2, which is also vacuum-rated, and Cv 0.62 for a 3V3 at 1/4 in, also vacuum-rated. Where duty is light, 3V1 at 3.0 W DC keeps coil heat down. If the actuator is a double-acting cylinder, you need five ports - the AirTAC 4V series. Pin down the five order points: NC initial state (fixed at purchase - no gasket flip or retrofit converts it), AC110V, DIN plug entry, 16 stations, centralised exhaust; PT thread is standard, with G and NPT as catalogue options.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNCC-16F FAQ
Sixteen NC 3/2 direct-acting valves, Cv 0.1 each, pressure 0-0.8 MPa, temperature -20 to 70 C, AC110V coils at 7 VA (112 VA total worst case), IP65 protection, PT1/8 ports; G and NPT threads can be ordered.
No. The valve's initial state is set in the body, and flipping the dedicated base gasket does not convert NC to NO - AirTAC states this explicitly. Choose NC (vented until energised) or NO (passing until energised) at order time. Double-acting actuators are not covered by any 3-port valve; use the AirTAC 4V series.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNCC-16F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.