Airtac 3V2M Solenoid Valve 3V2MNCC-17F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNCC-17F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageAC110V
- Electrical entryDIN plug (DIN socket type)
- Stations17
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNCC-17F
The AirTAC 3V2MNCC-17F is a complete 17-station manifold assembly: seventeen normally closed 3/2 valve bodies fixed to a matching 17F base. Each body is direct-acting with a single solenoid and spring return, built around a coaxial poppet shut-off that seats firmly on PT1/8 ports. Normally closed means no air reaches any outlet until that coil is energised.
Because every valve sits on one base, all seventeen share a single air supply and a single wiring run, so a fault shows up station by station instead of across seventeen loose valves. Coils are AC110V at 7 VA each through DIN plugs - budget up to 119 VA if all seventeen hold energised at once. Exhausts join into one centralised port, and Cv 0.1 per station is a flow coefficient set by the base path, not a flow rate.
Airtac 3V2M Solenoid Valve 3V2MNCC-17F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNCC-17F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally closed |
| Item form | Complete assembly — 17 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC110V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNCC-17F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| AC110V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 17F | 17 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNCC-17F Is Used
Welding fixture clamp bank
Seventeen single-acting swing clamps on a car-body jig toggled in sequence from one AC110V rail and one air inlet.
Bottle capping machine
Per-lane cap chute gates and reject blow-off nozzles switched individually, all venting into one centralised exhaust.
Press-tool part clamping
Seventeen pneumatic hold-downs on a stamping die that stay vented and safe whenever power is lost, thanks to the normally closed state.
Is the Airtac 3V2M Solenoid Valve 3V2MNCC-17F the Right Part?
Pick 3V2M when manifold density matters more than per-station flow: Cv 0.1 per station, because the flow path runs through the base. If one station needs a bigger flow path, mount an individual 3V2 there instead (Cv 0.18 at 1/8 in, 0.19 at 1/4 in, and vacuum-rated); for the highest flow in the range, 3V3 gives Cv 0.62 at 1/4 in and is also vacuum-rated; for a small duty, 3V1 runs at just 3.0 W on DC. Double-acting cylinders are outside any 3/2 valve - that takes the AirTAC 4V series. Confirm the state before ordering: normally closed cannot be converted to normally open after purchase, by any means.
Match five points plus thread: initial state NC, coil AC110V, entry DIN plug, 17 stations, centralised exhaust, and PT thread - the standard on this family, with G and NPT as order options.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNCC-17F FAQ
It is a 3/2-way normally closed manifold assembly with Cv 0.1 per station, operating pressure 0-0.8 MPa (0-114 psi), media temperature -20 to 70 C, AC110V coil power 7 VA (DC versions 7.0 W), IP65 protection (DIN 40050), PT1/8 ports and centralised exhaust.
No. The state is fixed by how the valve is built; the dedicated base gasket cannot be flipped to convert NC to NO, and the catalogue states this explicitly. Order 3V2MNOCC-17F instead if your logic needs normally open.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNCC-17F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.