Airtac 3V2M Solenoid Valve 3V2MNCC-18F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNCC-18F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageAC110V
- Electrical entryDIN plug (DIN socket type)
- Stations18
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNCC-18F
Order the AirTAC 3V2MNCC-18F when a machine needs eighteen separately switched 3/2 functions but only one plumbing point. The normally closed bodies are direct-acting, spring return and coaxial shut-off in construction, and they mount on an 18F base that distributes one shared supply to every station.
The electrical side is equally unified: AC110V coils at 7 VA each, wired through DIN plugs, give a worst-case draw of about 126 VA with all eighteen energised - size the transformer for that. A centralised exhaust collects every vent into a single port. Cv 0.1 per station reflects flow through the base rather than the valve alone.
Airtac 3V2M Solenoid Valve 3V2MNCC-18F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNCC-18F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally closed |
| Item form | Complete assembly — 18 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC110V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNCC-18F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| AC110V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 18F | 18 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNCC-18F Is Used
IC handler socket actuators
Eighteen lift and clamp actuators on a semiconductor test handler, each vented or fed by its own 3/2 station.
Multi-lane tray sealing
Hold-down cylinders on eighteen sealing lanes, wired and plumbed from one manifold so a lane fault is found in seconds.
Dosing skid pilot stages
Eighteen 3/2 stations acting as pilot switches for larger process valves on a chemical dosing skid, one wiring loom throughout.
Is the Airtac 3V2M Solenoid Valve 3V2MNCC-18F the Right Part?
Choose 3V2M where many small 3/2 functions share one supply; accept Cv 0.1 per station as the price of that density. A station that needs more flow belongs on a standalone 3V2 (Cv 0.18 at 1/8 in, 0.19 at 1/4 in, vacuum-rated), while 3V3 (Cv 0.62, 1/4 in, vacuum-rated) covers the top of the range and 3V1 (3.0 W on DC) covers low-power duties. If the actuator is a double-acting cylinder, move to the AirTAC 4V series instead. The normally closed state of this assembly is locked in at manufacture - there is no field conversion.
Before ordering, tick the list: state NC, voltage AC110V, entry DIN plug, 18 stations, centralised exhaust, and thread (PT standard here; G or NPT available as catalogue order options).
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNCC-18F FAQ
Flow coefficient Cv 0.1 per station, pressure range 0-0.8 MPa (0-114 psi), temperature range -20 to 70 C, coil power 7 VA on AC110V (DC coils are 7.0 W), IP65 (DIN 40050) electrical protection, PT1/8 ports and a centralised exhaust.
No. A 3/2 valve has three ports - supply, outlet, exhaust - so it feeds or vents a single-port device: single-acting spring-return cylinders, clamps, blow nozzles or pilot stages. A double-acting cylinder needs pressure on both sides, which requires a 5-port valve such as the AirTAC 4V series.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNCC-18F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.