Airtac 3V2M Solenoid Valve 3V2MNCC-20F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNCC-20F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageAC110V
- Electrical entryDIN plug (DIN socket type)
- Stations20
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNCC-20F
Twenty NC 3/2 stations, one air supply, one wiring run: the 3V2MNCC-20F is the fully populated version of the 3V2M manifold. Each valve is direct-acting, spring-return and coaxial shut-off, opening its outlet only while its AC110V coil is energised. Manual override on every body helps you prove out each station during commissioning without energising anything.
Budget the power: every AC110V coil draws 7 VA, so with all twenty energised at once the assembly needs roughly 140 VA - size the control transformer for that worst case, not the average. Exhaust is centralised through a single shared port, and the NC initial state is fixed at purchase because reversing the dedicated base gasket does not convert it. Order as genuine AirTAC.
Airtac 3V2M Solenoid Valve 3V2MNCC-20F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNCC-20F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally closed |
| Item form | Complete assembly — 20 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC110V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNCC-20F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| AC110V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 20F | 20 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNCC-20F Is Used
PCB pallet line
Twenty clamp points along an SMT pallet conveyor, each controlled from one manifold instead of twenty loose valves and fittings.
Filling line reject gates
Reject blow-off and gate valves spaced down a bottling line, sharing one supply and one exhaust header for tidy routing.
Parcel sorter chutes
Gate and pusher valves across a sorting station bank, all venting to the single centralised exhaust to keep ducting simple.
Is the Airtac 3V2M Solenoid Valve 3V2MNCC-20F the Right Part?
Density is the point of this assembly, and density costs flow: every station passes Cv 0.1 through the base, less than an individual 3V2 (Cv 0.18 at PT1/8, Cv 0.19 at PT1/4, vacuum-rated) or a 3V3 (Cv 0.62 at PT1/4). Mixed builds are fine, so substitute an individual 3V2 or 3V3 valve at any high-flow station; 3V1 at 3.0 W DC suits low-power duties.
Confirm the five-point match: NC (not convertible to NO after purchase - never count on gasket tricks), AC110V, DIN plug entry, 20 stations, centralised exhaust, PT threads (G/NPT to order). Anything double-acting belongs on the AirTAC 4V series, not on a 3/2 manifold.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNCC-20F FAQ
Twenty 3/2 NC stations, each Cv 0.1, pressure 0-0.8 MPa, temperature -20 to 70 C, AC110V coil 7 VA each (about 140 VA with all energised), IP65 (DIN 40050), PT1/8 ports. Air filtered to 40 um or finer; lubrication not required.
Each station feeds or vents one outlet, so it suits single-acting spring-return cylinders, air blow, clamping and pilot duty. It cannot drive a double-acting cylinder - that takes a 5-port valve such as the AirTAC 4V series. Also remember the NC state is fixed: the dedicated base gasket cannot be reversed to convert NC to NO after purchase.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNCC-20F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.